Preventative maintenance kit for Benchmark Scientific BioClave research autoclaves, including the BioClave 28 (B4000-28) and BioClave 18 (B4000-18). Note: the kit does not include the door seal.
Gable (peaked) lid for Benchmark Scientific myBath CR circulating water baths, each. The sloped design lets condensation run back into the bath and leaves headroom for taller vessels, reducing evaporation and heat loss. B2023-GL10: for the 10 liter m
Additional shelves for Benchmark Scientific SureTemp laboratory ovens, sold individually. Select the shelf that matches your oven: H2606-30SH: for the SureTemp Oven 30L (H2606-30) H2606-50SH: for the SureTemp Oven 50L (H2606-50) H2606-150SH: for the
Optional oxygen (O2) gas regulator for Benchmark Scientific SureTherm CO2 incubators. Please contact us to confirm compatibility with your incubator model before ordering.
Additional shelf for Benchmark Scientific SureTherm 45 liter CO2 incubators, 1 each. Compatible with the SureTherm CO2 Incubator, 45 Liter (H3565-45). For 180 liter incubators, see H3550-180-SH.
Solid (undrilled) heating block, 1.25 in (32mm) high, for Benchmark Scientific myBlock dry baths. For a block drilled to your own tube or vessel dimensions, see the custom block (BSH100-CU).
Benchmark Scientific MAGic Clamp tube racks attach magnetically to the MAGic Clamp universal platform of compatible Benchmark orbital shakers and incubator shakers. Choose the culture tube rack for 14mm tubes or a horizontal rack that holds microtube
Benchmark Scientific MAGic Clamp magnetic flask clamps for large Erlenmeyer flasks. The clamp's magnetic base locks onto the MAGic Clamp universal platform of compatible Benchmark orbital shakers and incubator shakers, so flasks can be repositioned i
Optional and replacement stirring propellers for the Benchmark Scientific OS20L and OS40L overhead stirrers (IPS2050 series). Stainless steel propellers suit general mixing, while PTFE (Teflon) propellers offer chemical resistance for corrosive sampl
The C3100-130RS is a set of 8 rotor shields used with Benchmark Scientific LC-8 series centrifuges (like the C3100/3200) to accommodate and safely hold taller tubes (up to about 130 mm long) during centrifugation. It comes in a pack of 8 shields that
The Benchmark Scientific C1008-ROT2A is a strip rotor accessory designed for use with the MyFuge Mini centrifuge. It is used to spin down PCR strip tubes, typically 0.2 mL tubes arranged in strips, allowing multiple small samples to be centrifuged at
The Benchmark Scientific C1005 T5 is a pack of 5 mL clear centrifuge tubes with attached flip-top caps, ideal for centrifugation, sample prep, storage, and general lab use. They are compatible with standard centrifuges, racks, dry baths, and vortexer
Benchmark Scientific C1005 AC2 is an adapter pack for laboratory centrifuges. It's designed to let you securely hold smaller tubes and vials inside a centrifuge rotor so they can be spun properly without wobbling or imbalance. Compatible with the Ben
The Benchmark C2000 DWMP is an optional deep well plate rotor accessory for the Benchmark C2000 PlateFuge Microplate MicroCentrifuge. It's designed to hold deep well plates up to about 35 mm tall so you can centrifuge these larger plates in the Plate
The Benchmark C2000 A02 is a tube adapter accessory for the Benchmark PlateFuge C2000 microplate centrifuge. It lets the centrifuge securely hold up to 96 0.2 mL tubes or 8 position and 12 position PCR strip tubes, so you can spin those formats in th
Benchmark Scientific C2417-RCMB is a COMBI-Rotor for compatible Benchmark micro-centrifuges such as the MC-24 and MC-24R Features: Centrifuging multiple tube types in one rotor Holds up to 24 1.5/2.0 mL microcentrifuge tubes Also accepts 2 PCR strips
Benchmark Scientific C2417-3202 is a 4 PCR strip rotor used with compatible Benchmark MC-24 refrigerated centrifuges Features: Spins PCR strip tubes (0.2 mL) Holds 4 PCR strips (32 tubes total) Used to spin down samples, collect liquid at the bottom
The C2417-2420H is an optional hermetically sealed rotor for the MC 24R refrigerated micro-centrifuge. It holds up to 24 1.5-2 mL micro-centrifuge tubes, allowing high-speed centrifugation while securely containing samples and expanding the MC 24R's
The Benchmark Cryovial Adapter for C2417 R5 Rotor (C2417 R5 ADP2) is an accessory for the MC 24 microcentrifuge. It includes a pack of adapters that let you securely hold 2 mL cryovial tubes in the C2417 R5 8 5 mL rotor, expanding that rotor's versat
Benchmark Scientific B5200-FIL is the main HEPA filter for the SureAir PCR Workstation (B5200). It removes fine airborne particles to maintain a clean, low-contamination workspace. This is the filter that actually provides the clean air environment n
The Benchmark Scientific B5200-PRE is a replacement pre-filter used with the Benchmark SureAir PCR Workstation (model B5200). It captures larger particles and dust from incoming air before that air reaches the main HEPA filter. This helps protect the
The Benchmark Scientific B1450-IC is the optional pack of double-sided UV-C indicator cards for the Benchmark Scientific UVClave chamber (B1450). These cards (Sold in packs of 25) change color when exposed to sufficient UV-C light, giving a clear vis
The B1450-ISS is the optional pack of UV-C indicator stickers (also called UVC indicator stickers) for the Benchmark Scientific UVClave chamber (B1450). These small (0.5" 0.5") adhesive stickers change color when properly exposed to UV-C light, provi
The Benchmark Scientific B1450-SH-UV is the optional UV-C transparent shelf (extra or replacement) for the Benchmark Scientific UVClave chamber (B1450). Made of a special material that transmits >90% of UV-C light, it allows full penetration of UV ir
The B1450-SH is an optional stainless steel wire shelf (extra shelf) designed specifically for the Benchmark Scientific UV Clave Ultraviolet Chamber (model B1450). It lets the user to place additional tools, vessels, pipettes, or lab items inside the
The Benchmark B1201-BEAD (also sold as Benchmark B1201-BEAD 3mm Glass Beads Refill or Benchmark Replacement Glass Beads for MicroBead Sterilizer) is a refill pack of glass beads used with the Benchmark B1201 Micro Bead Sterilizer. These beads fill th
The Benchmark B1001 XL-RA Heating Element Assembly (for use with the BactiZapper XL) is a replacement heating element for the Benchmark Scientific BactiZapper XL B1001-XL micro-sterilizer. It's used to replace the internal infrared heating element (1
The Benchmark B1001 RA Heating Element Assembly (for use with the BactiZapper) is a replacement heating element for the Benchmark Scientific BactiZapper Tilt B1001 micro-sterilizer. It's used to replace the internal infrared heating element (115 or 2
The Benchmark B1000 RA Heating Element Assembly (for use with the BactiZapper) is a replacement heating element for the Benchmark Scientific BactiZapper B1000 micro-sterilizer. It's used to replace the internal infrared heating element (115 or 230V v
The Benchmark Scientific B1000-03 Slide Dryer Attachment is an accessory for the Benchmark Scientific BactiZapper infrared micro-sterilizer. It's designed to hold and dry up to three microscope slides using the heat from the sterilizer after steriliz
The Benchmark Scientific B4000 PA is a pack of replacement thermal paper rolls (typically 2.25 50 ft, usually 3 rolls) designed for use with the Benchmark Scientific B4000-P and Accuris W3130 thermal printer that works with BioClave autoclaves and Ac
The Benchmark Scientific B4000-P Thermal Printer is an accessory for Benchmark BioClave bench-top autoclaves. It is used to print hard-copy records of each sterilization cycle, including: Temperature Pressure Cycle time Date and Cycle completion stat
The Benchmark Scientific H4000-ROD is a stainless-steel support rod accessory for H4000 series hotplates and hotplate stirrers. It is used to hold thermometers, temperature probes, or other lab accessories securely above the heating surface during ex
The Benchmark Scientific IPS7101-BAR-150 is a magnetic stir bar (about 150mm x 24mm) used in laboratory magnetic stirrer devices. It sits inside a liquid sample and, when the stirrer's magnetic field rotates, it spins to mix or agitate the solution w
The Benchmark Scientific IPS7101-BAR-100 is a magnetic stir bar (about 1 00mm) used in laboratory magnetic stirrer devices. It sits inside a liquid sample and, when the stirrer's magnetic field rotates, it spins to mix or agitate the solution without
The Benchmark Scientific H4000-BAR is a magnetic stir bar (about 1 inch by 5/16 inch) used in laboratory magnetic stirrer devices. It sits inside a liquid sample and, when the stirrer's magnetic field rotates, it spins to mix or agitate the solution
The Benchmark Scientific H3770-CSTF is a chemically resistant clamp set for H3770 hotplates and stirrers. It includes a support rod and Teflon-coated clamp for secure probe holding in harsh chemical environments.
The H3770-CS is a clamp set accessory for the Benchmark Scientific H3770 series hotplates and stirrers. It includes a support rod and adjustable clamps that attach to the instrument, allowing you to securely hold temperature probes, thermometers, or
The Benchmark Scientific H3770 TP is an optional temperature probe accessory designed for use with the Benchmark Scientific H3770 series hotplates and stirrers Features: It measures the actual temperature of your sample or reaction rather than just t
The Benchmark Scientific H3770 ROD is an optional support rod accessory designed to be used with Benchmark Scientific's H3770 series hotplates and stirrers (such as digital hotplates, magnetic stirrers, or hotplate-stirrers). Benefits: It mounts to t
The Benchmark Scientific H2300-O2REG part number corresponds to an optional oxygen gas regulator accessory used with Benchmark Scientific incubators that support controlled oxygen environments. It regulates the pressure of an O gas source (like a cyl
The Benchmark Scientific H3565 180 LCI IncuView Integrated Microscope Shelf (often listed as H3565-180-LCI) is an optional integrated microscope shelf for Benchmark Scientific's 180 L SureTherm CO incubators. It provides an IncuView LCI (Live Cell Im
The Benchmark Scientific H3565 45 LCI IncuView Integrated Microscope Shelf (often listed as H3565-45-LCI) is an optional integrated microscope shelf for Benchmark Scientific's 45 L SureTherm CO incubators. It provides an IncuView LCI (Live Cell Imagi
The Benchmark Scientific H3550 180 SK is a stacking kit accessory for SureTherm 180-liter incubators, designed to let you stack one incubator unit securely on top of another. It helps maximize lab space by creating a vertical setup and positions the
The Benchmark Scientific H3550 45 SK Stacking Kit (also sold as Benchmark H3550 45 SK Stacking kit for 45 liter incubator / Benchmark Scientific H3550 45 SK Stacking Kit) is a stacking kit accessory for Benchmark Scientific 45-liter incubators. It le
The Benchmark Scientific H3550 180 SH is an additional stainless steel shelf accessory designed for use inside Benchmark Scientific's 180-liter incubators (such as the SureTherm/ST-180 CO incubator series). It provides extra shelving space so you can
The Benchmark Scientific H2505-130SH Extra Shelf is an accessory shelf designed for use with the Benchmark Scientific SureTemp 130 liter incubators . It provides an additional shelving surface inside the incubator to increase the number of samples yo
The Benchmark Scientific H2505-70SH Extra Shelf is an accessory shelf designed for use with the Benchmark Scientific SureTemp 70 liter incubators . It provides an additional shelving surface inside the incubator to increase the number of samples you
The Benchmark Scientific H2505-40SH Extra Shelf is an accessory shelf designed for use with the Benchmark Scientific SureTemp 40 liter incubators . It provides an additional shelving surface inside the incubator to increase the number of samples you
The Benchmark Scientific H2265-SH Extra Shelf is an accessory shelf designed for use with the Benchmark Scientific MyTemp Mini 65HC incubators . It provides an additional 12" 15" shelving surface inside the incubator to increase the number of samples
The Benchmark Scientific H2300-SH Extra Shelf is an accessory shelf designed for use with the Benchmark Scientific MyTemp Mini CO2 incubators (Model H2300-HC2). It provides an additional 10.5" 8" shelving surface inside the incubator to increase the
The Benchmark Scientific H2200-SH Extra Shelf is an accessory shelf designed for use with the Benchmark Scientific MyTemp Mini digital incubators (models like the H2200-H and H2200-HC). It provides an additional 10.5" 8" shelving surface inside the i
The Benchmark Scientific BSW2MTS is a dry bath block designed for Benchmark digital dry baths that holds 6 strips of 2.0 mL microtubes (microtube strips) for uniform heating of multiple samples at once
The Benchmark Scientific BSWNMR is a dry bath heating block that holds 30 NMR tubes (typically ~5 mm diameter) for use in Benchmark dry baths, providing uniform temperature control for NMR sample preparation or incubation
The Benchmark Scientific BSWHEM is a dry bath heating block designed to hold 48 hematocrit tubes (1.9 mm diameter) for use in Benchmark dry baths. It provides uniform heating of hematocrit samples but is not compatible with the dry bath cover
The Benchmark Scientific BSWMT is a dry bath heating block designed to hold one microtiter (microplate) plate-either skirted or non-skirted-for use in 2-block or 4-block Benchmark dry baths. It provides uniform temperature transfer for incubating mic
The Benchmark Scientific BSWPCR2 is a dry bath heating block designed to hold one 96-well PCR plate (0.2 mL wells, skirted or non-skirted) for use in 2-block or 4-block Benchmark digital dry baths. It provides uniform temperature transfer for PCR pla
The Benchmark Scientific BSWPCR1 is a dry bath heating block that holds one 96-well PCR plate (0.2 mL wells, skirted or non-skirted) for use in single-block Benchmark dry baths, providing uniform temperature incubation for PCR or sample processing
The Benchmark Scientific BSWCMB is a Quick-Flip combination dry bath block that fits Benchmark dry baths and lets you use two tube formats on one block. One side holds 24 1.5 mL/2.0 mL tubes and 14 0.5 mL tubes, and the flip side holds 6 PCR strips,
The Benchmark Scientific BSWBCT is a blood collection combi-block for Benchmark dry baths. It holds 12 tubes with ~13 mm diameter and 8 tubes with ~16 mm diameter, so you can heat common blood collection/Vacutainer tubes and similar sizes in one bloc
The Benchmark Scientific BSW1516 is an aluminum dry bath heating block that fits Benchmark dry baths and holds 12 tubes with 15 mm or 16 mm diameters (often equivalent to 12 10 mL tubes or blood tubes) for precise, uniform sample heating
The Benchmark Scientific BSW50 is an aluminum dry bath heating block designed for Benchmark dry baths that holds 5 50 mL centrifuge tubes with precision-machined cavities for uniform temperature transfer in heating applications
The Benchmark Scientific BSW1232 is a dry bath heating block that holds 20 HPLC vials or Cryovials for use in Benchmark dry baths, providing precise, uniform heating of those small tubes
The Benchmark Scientific BSW13 is an aluminum dry bath heating block designed for Benchmark digital dry baths. It holds 20 tubes 12 mm-13 mm in diameter, such as 5 mL or 7 mL blood or test tubes, with precision-machined cavities for uniform heating o
The Benchmark Scientific BSW10 is an aluminum dry bath heating block that holds 20 10 mm test tubes or 20 2.0 mL centrifuge tubes for use in Benchmark digital dry baths, providing even, precision heating of samples
The Benchmark Scientific BSW15 is an aluminum dry bath heating block that fits Benchmark dry baths and holds 12 15 mL centrifuge tubes with precision-machined cavities for even, uniform heating
The Benchmark Scientific BSW5MT is a dry bath heating block designed for Benchmark digital and traditional dry baths. It holds 12 5 mL (17 mm diameter) centrifuge tubes in precision-machined aluminum cavities for uniform heating of your samples
The Benchmark Scientific BSW05 block is an aluminum dry bath heating block that holds 24 0.5 mL centrifuge tubes for use in compatible dry baths, providing precise, uniform heating of small-volume samples
The Benchmark Scientific BSW1520 is a dry bath heating block designed to fit Benchmark digital dry baths. It holds 24 centrifuge tubes sized 1.5 mL or 2.0 mL, with precision-machined aluminum cavities for uniform heating of your samples
The Benchmark Scientific BSW1500 is an aluminum dry bath heating block that holds 24 1.5 mL conical centrifuge tubes for use in Benchmark digital dry baths, providing precise, uniform heating
The Benchmark Scientific BSW02 is a dry bath heating block designed to fit into Benchmark dry baths and hold 48 0.2 mL tubes or 6 PCR strips (8 tubes each) for uniform heating of small-volume samples
The Benchmark Scientific BSW01-DR is a custom drilling option for the BSW01 solid dry bath block, allowing up to 36 custom holes to be drilled to fit specific tubes or sample formats for laboratory dry baths
The Benchmark Scientific BSW01 is a solid aluminum block accessory designed for use with Benchmark Scientific digital dry baths. It serves as a solid heating block that can hold microscope slides or be custom machined for specific lab applications, a
Benchmark Scientific BSH-TP1 is an optional external temperature probe for MyBlock and isoBlock dry baths. It lets you place a probe directly inside a sample tube for real-time monitoring and control of actual sample temperature, improving accuracy b
Benchmark Scientific BSH100-A12 is a 12 V DC power adapter for MyBlock Mini dry baths, enabling the unit to run from a 12 V source (such as a vehicle or portable battery) for field or mobile use
Benchmark Scientific BSH100-500 is a dry bath block for MyBlock Mini dry baths designed to hold two 50 mL centrifuge tubes for stable, temperature-controlled heating
Benchmark Scientific BSH100-150 is a dry bath block for MyBlock Mini dry baths that holds four 15 mL centrifuge tubes for secure, temperature-controlled heating
Benchmark Scientific BSH100-5MT is a dry bath block designed to hold five micro test tubes (typically 0.5 mL) in compatible MyBlock dry bath units, providing secure, temperature-controlled heating for small tubes
Benchmark Scientific BSH100-15HL is a dry bath block designed for MyBlock BSH200-HL dry bath with heated lid, specifically to hold 15 1.5 mL centrifuge tubes and deliver uniform, temperature-controlled heating
Benchmark Scientific BSH100-1520 is a dry bath block for MyBlock Mini dry baths designed to hold 15 1.5 mL or 2.0 mL conical tubes for secure, temperature-controlled heating
Benchmark Scientific BSH100-15 is a dry bath block for MyBlock Mini units designed to hold 15 1.5 mL tubes for stable, temperature-controlled heating
Benchmark Scientific BSH100-1232 is a dry bath block designed to fit MyBlock Mini dry baths and hold 15 2 mL HPLC, autosampler, or cryovial tubes for secure, temperature-controlled heating
The Benchmark Scientific BSH100-1213 is a dry bath block made to fit MyBlock Mini dry baths that holds up to 15 tubes or vacutainers with 12-13 mm diameters. It's about 60 mm tall and provides secure, temperature-controlled heating for those tube
Benchmark Scientific BSH100-05 is a dry bath block designed to hold 24 0.5 mL centrifuge tubes for use with MyBlock Mini dry baths, providing secure temperature-controlled heating for small volume tubes
The Benchmark Scientific BSH100-02 block is a dry bath insert that holds 40 0.2 mL tubes or up to five 8-tube PCR strips for use in MyBlock Mini dry baths, providing secure, temperature-controlled heating for those tubes
The Benchmark Scientific BSH100-CV is a dry bath block designed to hold eight cuvettes (12.5 12.5 32 mm) for use with compatible Benchmark Scientific dry baths like the MyBlock Mini series units. It provides a secure, temperature-controlled platform
The Benchmark Scientific BSH100-CU is a customizable solid dry bath block designed to fit Benchmark MyBlock mini dry baths (such as BSH200 and BSH300). It's 1.25 in (32 mm) tall and can be custom drilled with up to 20 holes to hold tubes or vials siz
The Benchmark Scientific SB0012-T500 is an optional microtube rack made to hold 40 x 0.5mL tubes, offering an organized and efficient way to manage samples in the lab. Built for durability, it is compatible with the SB-12L Shaking Water Bath and is e
The Benchmark Scientific SB0012-T1520 is an optional microtube rack made to hold 1.5/2.0 mL tubes, offering an organized and efficient way to manage samples in the lab. Built for durability, it is compatible with the SB-12L Shaking Water Bath and is
The Benchmark Scientific B2000-8-T500 is a test tube rack accessory for Benchmark Scientific's myBath 8 liter water baths, designed to hold up to 30 50 mL tubes during water bath use helping organize and support tubes securely in the bath
The Benchmark Scientific B2000-8-T150 is a test tube rack accessory for Benchmark Scientific's myBath 8 liter water baths, designed to hold up to 76 15 mL tubes during water bath use helping organize and support tubes securely in the bath
The B2000-4-T500 is a test tube rack accessory for Benchmark Scientific's myBath water baths, designed to hold up to 15 50ml tubes securely during use. It fits the 4 L MayBath to organize and support small tubes in the bath
The B2000-4-T150 is a test tube rack accessory for Benchmark Scientific's myBath water baths, designed to hold up to 41 15ml tubes securely during use. It fits the 4 L MayBath to organize and support small tubes in the bath
The B2000-4-T1520 is a test tube rack accessory for Benchmark Scientific's myBath water baths, designed to hold up to 40 1.5/2.0 ml tubes securely during use. It fits the 4 L MayBath to organize and support small tubes in the bath
The B2000-4-T5 is a test tube rack accessory for Benchmark Scientific's myBath water baths, designed to hold up to 40 0.5 ml tubes securely during use. It fits the 4 L MayBath to organize and support small tubes in the bath
DP0150-12 refers to an optional 12mm diameter titanium alloy horn accessory for Benchmark Scientific's Pulse 650 ultrasonic homogenizers This horn is designed to process sample volumes, typically around 50 ml to 500 ml, when used with the appropriate
DP0150-10 refers to an optional 10mm diameter titanium alloy horn accessory for Benchmark Scientific's Pulse 650 ultrasonic homogenizersThis small horn is designed to process sample volumes, typically around 30 ml to 300 ml, when used with the approp
DP0150-8 refers to an optional 8mm diameter titanium alloy horn accessory for Benchmark Scientific's Pulse ultrasonic homogenizers (such as the Pulse 150 and Pulse 650). This small horn is designed to process tiny sample volumes, typically around 25
DP0150-6 refers to an optional 6mm diameter titanium alloy horn accessory for Benchmark Scientific's Pulse ultrasonic homogenizers (such as the Pulse 150 and Pulse 650). This small horn is designed to process tiny sample volumes, typically around 10
DP0150-3 refers to an optional 3mm diameter titanium alloy horn accessory for Benchmark Scientific's Pulse ultrasonic homogenizers (such as the Pulse 150 and Pulse 650). This small horn is designed to process tiny sample volumes, typically around 3 m
DP0150-2 refers to an optional 2 mm diameter titanium alloy horn accessory for Benchmark Scientific's Pulse ultrasonic homogenizers (such as the Pulse 150 and Pulse 650). This small horn is designed to process tiny sample volumes, typically around 0.
The Benchmark Scientific D1000-ST is a steel stand accessory made to securely hold the D1000 handheld homogenizer for hands-free operation. Its sturdy base helps prevent tipping, and the height can be adjusted to fit different vessels and racks - the
The Benchmark Scientific D1000-M7 is a replacement or optional generator probe for the D1000 handheld homogenizer. It is a 7 mm 50 mm stainless-steel probe designed specifically for homogenizing samples in microtubes. These probes can be autoclavable
The Benchmark Scientific D1000-M5 is a replacement or optional generator probe for the D1000 handheld homogenizer. It is a 5 mm 50 mm stainless-steel probe designed specifically for homogenizing samples in microtubes. These probes can be autoclavable
The Benchmark Scientific D1000-M14 is an optional saw-tooth generator probe designed for use with the D1000 handheld homogenizer. It measures 14 mm in diameter and 130 mm long and is ideal for homogenizing samples in 50 mL tubes and larger vessels up
The Benchmark Scientific D1000-M10 is an optional generator probe accessory for the Benchmark Scientific D1000 handheld homogenizer. It's a 10 mm 115 mm saw-tooth probe designed specifically for processing samples in 15 mL and 50 mL tubes when used w
Garnet shards are acid washed, heat treated, and ready to use. Supplied in a 250 g bottle, their sharp edges help shred tough samples and are often paired with 6 mm zirconium oxide satellites. Compatible with Benchmark and other homogenizers. Also av
These 6 mm ceria-coated zirconium oxide (ceramic) satellites are acid washed, heat treated, and ready to use. Supplied in packs of 50, the wide central band increases surface area. Ideal for tough tissues, seeds, hair, and dried samples. Compatible w
These 5 mm steel beads are ideal for homogenizing tough tissues, plants, seeds, and dried samples. Alcohol washed, heat treated, and ready to use. Supplied in packs of 1,000, compatible with Benchmark and other homogenizers Features: Loose beads for
These 2.8 mm stainless steel beads are alcohol washed, heat treated, and ready to use. Supplied in packs of 1,000, ideal for tough tissues, muscle, plants, seeds, and dried samples. Compatible with Benchmark and other homogenizers; also in prefilled
Triple-Pure 3.0 mm zirconium beads are acid washed, heat treated, and nuclease- and protease-free. Supplied in a 300 g bottle, ideal for tissues, plants, insects, and dried samples. Ready to use in Benchmark or other homogenizers; also in prefilled 2
These 1.5 mm zirconium (ceramic) beads from the Triple-Pure line are acid washed, heat treated, and certified nuclease- and protease-free. Supplied ready-to-use in a 250 g bottle, they're ideal for homogenizing soft tissues like liver and small insec
These 1 mm Triple-Pure zirconium beads are acid washed, heat treated, and nuclease- and protease-free. Supplied in a 250 g bottle, ideal for homogenizing bacteria, fungi, spores, molds, and small yeasts. Compatible with Benchmark and other homogenize
These 0.5 mm Triple-Pure zirconium beads are acid washed, heat treated, and nuclease- and protease-free. Supplied in a 250 g bottle, ideal for homogenizing bacteria, fungi, spores, molds, and small yeasts. Compatible with Benchmark and other homogeni
These 0.1 mm zirconium (ceramic) beads from the Triple-Pure line are acid washed, heat treated, and certified nuclease- and protease-free. Supplied ready-to-use in 250 g bottles, ideal for homogenizing gram-positive and gram-negative bacteria. Compat
These 1.0 mm silica (glass) beads are ideal for homogenizing bacteria, fungi, spores, molds, and small yeasts. Acid washed, heat treated, and ready to use. Supplied in 200 g bottles, compatible with Benchmark and other bead homogenizers. Also offered
These 0.5 mm silica (glass) beads are ideal for homogenizing bacteria, fungi, spores, molds, and small yeasts. Acid washed, heat treated, and ready to use. Supplied in 200 g bottles, compatible with Benchmark and other bead homogenizers. Also offered
These 0.1 mm silica beads are ideal for homogenizing gram-positive and gram-negative bacteria. Acid washed, heat treated, ready to use, compatible with any bead homogenizer. Supplied in a 200 g bottle. Features: Loose beads for filling homogenization
Prefilled 5 mL tubes contain 3 mm diameter zirconium beads for use in most bead homogenizers. Beads are acid washed, heat treated, and certified nuclease- and protease-free. Ready to use, these tubes are ideal for homogenizing tissues such as heart,
Prefilled 5 mL tubes with 2.8 mm stainless steel beads, alcohol washed and heat treated to be nuclease- and protease-free. Ideal for tough tissues, plant materials, seeds, and dried samples. Pack of 50, compatible with BeadBug 6 and BeadBlaster 24 us
Prefilled 2 mL tubes each contain a 6 mm banded zirconium (ceramic) satellite. Acid washed and heat treated, nuclease- and protease-free. Ideal for tough tissues, seeds, hair, and dried samples. Compatible with most bead homogenizers, including BeadB
These prefilled 2 mL tubes contain one large banded 6 mm zirconium satellite and garnet shards. The beads are alcohol-washed and heat-treated to eliminate contaminants, ensuring they are nuclease- and protease-free. The sharp garnet shards make them
These prefilled 2 mL tubes contain one large banded 6 mm zirconium satellite and garnet shards. The beads are alcohol-washed and heat-treated to eliminate contaminants, ensuring they are nuclease- and protease-free. The sharp garnet shards make them
The Benchmark Scientific C1005-SC-OB is the 5ml tube that comes in foam racks and each rack has 10 x 5ml sterile tubes. Comes in a pack of 50 racks/500 tubes.
This 5mL centrifuge tube offers the same ease of use as standard 1.5mL tubes, scaled for larger volumes. Made of RNase- and DNase-free polypropylene, it features an attached cap that opens and closes easily with one hand while ensuring a secure, leak
These 2.0 mL heavy-walled, reinforced micro-centrifuge tubes feature a conical bottom and skirted design. Ideal for dense beads and extended homogenization in most bead homogenizers. Comes in a pack of 600 with caps and sealing rings.
Benchmark Scientific D1031-T21 is the 2.0ml non-skirted micro-tubes. They come with caps and sealing ring in a pack/50 pcs
Benchmark Scientific D1031-T20 is the 2.0ml non-skirted micro-tubes. They come with caps and sealing ring in a pack/1000 pcs
Prefilled, reinforced 2 mL tubes contain 2.8 mm stainless steel beads for extended bead homogenization. Alcohol washed, heat treated, nuclease/protease free. Ideal for tough tissues, seeds, plants. Pack of 50, compatible with BeadBug 3, BeadBug 6, an
Prefilled 2 mL tubes contain 2.8 mm stainless steel beads for bead homogenization. Beads are alcohol washed, heat treated, and nuclease/protease free. Ideal for tough tissues, plants, seeds, and dried samples. Pack of 50 tubes, compatible with BeadBu
This starter kit includes 10 prefilled 2 mL tubes each of 0.1, 0.5, 1.0, 1.5, and 3.0 mm zirconium beads. Beads are acid washed, heat treated, and certified nuclease- and protease-free, processed via qPCR-tested methods to ensure no stray DNA. Compat
These 2 mL tubes are prefilled with 1.5 mm zirconium beads for bead homogenization. Beads are acid washed, heat treated, and certified nuclease- and protease-free, processed via qPCR-tested methods to ensure no stray DNA. Ideal for soft tissues like
These 2 mL tubes are prefilled with 1.5 mm zirconium beads for bead homogenization. Beads are acid washed, heat treated, and certified nuclease- and protease-free, processed via qPCR-tested methods to ensure no stray DNA. Ideal for soft tissues like
These ready-to-use 2 mL tubes are prefilled with 1.0 mm zirconium beads, acid-washed, heat-treated, and certified nuclease/protease-free. qPCR-tested to ensure no stray DNA. Ideal for homogenizing bacteria, fungi, spores, molds, and small yeasts. Sup
These ready-to-use 2 mL tubes are prefilled with 0.5 mm zirconium beads, acid-washed, heat-treated, and certified nuclease/protease-free. qPCR-tested to ensure no stray DNA. Ideal for homogenizing bacteria, fungi, spores, molds, and small yeasts. Sup
These prefilled 2 mL tubes contain 0.1 mm zirconium beads for efficient bead homogenization. The beads are acid-washed, heat-treated, and certified nuclease- and protease-free, with the filling process verified by qPCR to ensure no stray DNA. Ideal f
These 2 mL tubes come prefilled with 1.0 mm silica beads, cleaned and heat-treated to be nuclease- and protease-free. Ideal for homogenizing fungi, spores, algae, and larger yeasts. Compatible with most bead homogenizers, including the BeadBug 3, Bea
These 2 mL tubes are prefilled with 0.5 mm silica beads, acid washed and heat treated for nuclease- and protease-free use. Ideal for homogenizing bacteria, fungi, spores, molds, and small yeasts. Compatible with BeadBug 3, BeadBug 6, and BeadBlaster
These 2 mL tubes come prefilled with 0.1 mm silica beads, acid-washed and heat-treated to be nuclease- and protease-free. Ideal for homogenizing Gram-positive and Gram-negative bacteria. Ready-to-use, compatible with BeadBug 3, BeadBug 6, and BeadBla
Benchmark Scientific D1036-A5: 5 mL tube holder for BeadBug 6, holds one 5 mL tube per holder. Sold as a pack of 2
5ml tube holder for BeadBlaster 24/R. Holds 12x5ml tubes. For use with the BeadBlaster 24 and BeadBlaster 24R. Includes 12 place tube holder only (metal ring). Screw cap and tubes not included. Uses standard screw cap supplied with the BeadBlaster
The Benchmark Scientific T5000 A IS In Situ Adapter is a thermal cycler accessory that fits the T5000-96 (TC-9639) unit. It holds 4 standard microscope slides, enabling in-situ PCR directly on slides for gene expression, tissue assays, or other appli
The Benchmark Scientific H5100-HL Heated Lid is an optional accessory for the MultiTherm Touch Shaker, preventing condensation and evaporation during heating or incubation. It fits tubes up to 5 mL and microplates, features temperature control from 0
The Benchmark Scientific H5100 384 Block is a thermal block for the MultiTherm Touch system, designed to hold a 384 well microplate. It enables precise heating (0-105 C) and mixing/vortexing of high throughput samples Features: Temperature control fr
The Benchmark Scientific H5100 384 Block is a thermal block for the MultiTherm Touch system, designed to hold a 384 well microplate. It enables precise heating (0-105 C) and mixing/vortexing of high throughput samples Features: Temperature control fr
The Benchmark Scientific H5100 384 Block is a thermal block for the MultiTherm Touch system, designed to hold a 384 well microplate. It enables precise heating (0-105 C) and mixing/vortexing of high throughput samples Features: Temperature control fr
The Benchmark Scientific H5100 02 Block is a thermal block for the MultiTherm Touch system that holds 96 0.2 mL PCR tubes or one standard 96 well PCR plate. It supports precise temperature control from 0 to 105 C, ensuring uniform heating and consist
Benchmark Scientific H5100 2DWMP Block fits your MultiTherm Touch shaker. It holds a 96 well, 2 mL deep well microplate, allowing precise heating, cooling, and mixing from 0 C to 105 C for high throughput sample processing Features: Temperature contr
The Benchmark Scientific H5100 MP block is designed for the MultiTherm Touch system and holds one standard microplate. It enables precise, uniform temperature control from 0 C to 105 C for heating, cooling, and mixing plate-based samples Features: Te
The Benchmark Scientific H5100 500 Block is a modular thermal block for the MultiTherm Touch system. It holds 4 50 mL tubes and provides precise temperature control from 0 C to 105 C, allowing reliable heating, cooling, and mixing for larger-volume s
The Benchmark Scientific H5100-2CR is a precision-engineered heating block for the MultiTherm Touch, designed to securely hold 24 1.5/2.0 mL cryo tubes. It delivers uniform temperature control for reliable sample heating, cooling, and mixing, making
The Benchmark Scientific H5100 12 Block is a modular heating/cooling block designed for the MultiTherm Touch shaker. It accommodates 24 tubes with 12 mm diameter, providing precise thermal control (-10 C to 100 C) for temperature-sensitive workflows
The Benchmark Scientific H5100-5MT is a modular heating block designed for the MultiTherm Touch system, configured to hold eight (8) 5 mL centrifuge tubes, delivering precise thermal mixing and incubation for medium-volume tube workflows Features: Te
The Benchmark Scientific H5100-CMB is a combination block accessory for the MultiTherm shaker system. It holds 15 0.5 mL microtubes and 20 1.5 mL microtubes simultaneously Features: Temperature control from 0 to 105 C Multiple block options for plate
The Benchmark Scientific H5100-20 block is designed for use with the MultiTherm Touch shaker system and accommodates 35 2.0 mL microcentrifuge tubes, providing precise temperature control from 0 C to 105 C and compatibility with tubes and plates up t
The Benchmark Scientific H5100-15 block is designed for use with the MultiTherm Touch shaker system and accommodates 35 1.5 mL microcentrifuge tubes, providing precise temperature control from 0 C to 105 C and compatibility with tubes and plates up t
The Benchmark Scientific H5100-05 is an interchangeable aluminum heating block designed for the MultiTherm Touch dry bath mixers. It securely holds twenty-four (24) 0.5 mL microtubes, providing efficient, uniform heating and stable temperature contro
The H5000 WB from Benchmark Scientific is a multipurpose modular block designed for use with their MultiTherm shaker systems (e.g., the H5000 H or H5000 HC) Features: Temperature control from 0 to 100 C Exchangeable blocks, for tube sizes 0.2 to 50 m
The Benchmark Scientific H5000-CU is a customizable block for Benchmark Scientific MultiTherm shakers, designed to accommodate drilling to a maximum depth of 40 mm - Please email us at info@medlabamerica.com with your preferred specifications when pl
The Benchmark Scientific H5000 1232 block is designed for the MultiTherm shaking or temperature controlled system and holds up to 24 x 2 mL HPLC/Autosampler vials (12 x 28 mm) Features: Temperature control from 0 to 100 C Exchangeable blocks, for tub
The Benchmark Scientific H5000 DWMP block is designed for use with MultiTherm shakers and accommodates one deep well microplate (max. height 54 mm), providing uniform thermal control during shaking Features: Temperature control from 0 to 100 C Exchan
The Benchmark Scientific H5000 MP Block is an accessory for the MultiTherm shaking/temperature control system. It's designed to securely hold one standard microplate, allowing precise heating and/or cooling in lab workflows Features: Temperature cont
The Benchmark Scientific H5000-5MT block is designed for the MultiTherm shaker and vortexer systems. It securely holds up to 15 x 5mL conical centrifuge tubes for efficient thermal mixing and incubation. Compatible with MultiTherm models such as H500
The Benchmark Scientific H5000 500 Block is designed for use with the MultiTherm temperature controlled shaker systems. It accommodates 6 50 mL tubes, supports speeds up to 750 rpm, and operates within a temperature range up to 100 C Features: Temper
The Benchmark Scientific H5000 150 block is designed for use with MultiTherm temperature controlled shakers. It holds up to 12 15 mL tubes, supports speeds from 200-750 rpm, and temperature control from 10 C to 100 C Features: Temperature control fro
The Benchmark Scientific H5000 12 Block is an accessory designed for use with the MultiTherm shaker system. It accommodates 24 tubes of 12 mm diameter and is rated for use with tube sizes between 0.2 mL and 50 mL Features: Temperature control from 0
The Benchmark Scientific H5000 20 is a modular thermal block accessory designed for use with the MultiTherm series of temperature controlled shakers. Supports 35 2.0 mL microcentrifuge tubes simultaneously. Features: Temperature control from 0 to 100
The Benchmark Scientific H5000 15 is a modular thermal block accessory designed for use with the MultiTherm series of temperature controlled shakers. Supports 35 1.5 mL microcentrifuge tubes simultaneously. Features: Temperature control from 0 to 100
The Benchmark Scientific H5000-CMB is a combination block accessory for the MultiTherm shaker system. It holds 15 0.5 mL microtubes and 20 1.5 mL microtubes simultaneously Features: Temperature control from 0 to 100 C Exchangeable blocks, for tube si
The H5000 05 Block is an exchangeable metal heating/cooling block designed for use with the Benchmark Scientific MultiTherm shaker systems. It accommodates 54 0.5 mL microtubes, delivering precise thermal control from 0 C to 100 C for vortexing, incu
The Benchmark Scientific H5000 02 Block is a precision heating block designed for use with the MultiTherm shaker series. It accommodates 96 0.2 mL tubes or one standard PCR plate and is optimized for uniform thermal transfer in temperature controlled
The Benchmark Scientific BT1500 A05 is an adapter plate accessory from Benchmark Scientific designed for microplate shakers. Specifically, it accommodates 20 microtubes of 0.5mL size, allowing users to mount these tubes securely on compatible micropl
The Benchmark Scientific BT1500 A1520 is an adapter plate accessory from Benchmark Scientific designed for microplate shakers. Specifically, it accommodates 20 microtubes of 1.5 mL or 2.0 mL size, allowing users to mount these tubes securely on compa
The Benchmark Scientific F4069 vented caps are designed for use with 2.8lt and 5.0lt Erlenmeyer shaker flasks. Made from durable polypropylene, each cap features a 0.2 m sterile membrane that supports optimal aeration, enhancing cell growth and gas e
The Benchmark Scientific F4068 vented caps are designed for use with 500 mL and 1,000 mL Erlenmeyer shaker flasks. Made from durable polypropylene, each cap features a 0.2 m sterile membrane that supports optimal aeration, enhancing cell growth and g
The Benchmark Scientific F4067 vented caps are designed for use with 125 mL and 250 mL Erlenmeyer shaker flasks. Made from durable polypropylene, each cap features a 0.2 m sterile membrane that supports optimal aeration, enhancing cell growth and gas
Benchmark Scientific Erlenmeyer shaker flasks are made of polycarbonate, PETG, or styrene/butadiene (Jumbo only) with vented 0.2 m polypropylene caps for optimal aeration and cell growth. Baffled bottoms improve mixing and oxygenation, even at low sh
Benchmark Scientific Erlenmeyer shaker flasks are made of polycarbonate, PETG, or styrene/butadiene (Jumbo only) with vented 0.2 m polypropylene caps for optimal aeration and cell growth. Baffled bottoms improve mixing and oxygenation, even at low sh
Benchmark Scientific Erlenmeyer shaker flasks are made of polycarbonate, PETG, or styrene/butadiene (Jumbo only) with vented 0.2 m polypropylene caps for optimal aeration and cell growth. Baffled bottoms improve mixing and oxygenation, even at low sh
Benchmark Scientific Erlenmeyer shaker flasks are made of polycarbonate, PETG, or styrene/butadiene (Jumbo only) with vented 0.2 m polypropylene caps for optimal aeration and cell growth. Baffled bottoms improve mixing and oxygenation, even at low sh
Benchmark Scientific Erlenmeyer shaker flasks are made of polycarbonate, PETG, or styrene/butadiene (Jumbo only) with vented 0.2 m polypropylene caps for optimal aeration and cell growth. Baffled bottoms improve mixing and oxygenation, even at low sh
Benchmark Scientific Erlenmeyer shaker flasks are made of polycarbonate, PETG, or styrene/butadiene (Jumbo only) with vented 0.2 m polypropylene caps for optimal aeration and cell growth. Baffled bottoms improve mixing and oxygenation, even at low sh
Benchmark Scientific Erlenmeyer shaker flasks are made of polycarbonate, PETG, or styrene/butadiene (Jumbo only) with vented 0.2 m polypropylene caps for optimal aeration and cell growth. Baffled bottoms improve mixing and oxygenation, even at low sh
Benchmark Scientific Erlenmeyer shaker flasks are made of polycarbonate, PETG, or styrene/butadiene (Jumbo only) with vented 0.2 m polypropylene caps for optimal aeration and cell growth. Baffled bottoms improve mixing and oxygenation, even at low sh
Benchmark Scientific Erlenmeyer shaker flasks are made of polycarbonate, PETG, or styrene/butadiene (Jumbo only) with vented 0.2 m polypropylene caps for optimal aeration and cell growth. Baffled bottoms improve mixing and oxygenation, even at low sh
Benchmark Scientific Erlenmeyer shaker flasks are made of polycarbonate, PETG, or styrene/butadiene (Jumbo only) with vented 0.2 m polypropylene caps for optimal aeration and cell growth. Baffled bottoms improve mixing and oxygenation, even at low sh
The Benchmark Scientific H1010 SH is a shelf accessory (14 5.5 ) designed for use with orbital shaker or shaking incubator systems, offering a secure platform for Petri dishes, plates, and trays Features: Designed to fit within compatible shaker/incu
The Benchmark Scientific H1010-P-SP is a fixed "universal spring" platform designed to accommodate unique or non-standard vessels on orbital and shaker units. It is compatible with Benchmark Scientific shaker series.
The H1010 P MP is a specialized platform accessory that holds 6 standard microplates, designed for use with compatible orbital shakers from Benchmark Scientific. Purpose: Provides a dedicated microplate workstation on an orbital shaker, ideal for hig
The Benchmark Scientific H2300 REG is a CO gas regulator accessory designed to regulate the gas pressure from a cylinder to a CO incubator. It is compatible with the Benchmark Scientific CO and O incubators.
The Benchmark Scientific BR2000 STACK is an extra-large stacking platform accessory (14 12 ) designed for use with compatible rockers-especially the Benchmark Scientific OrbiBlotter. It features a flat mat and approximately 3 ( 7.6 cm) clearance betw
The Benchmark Scientific H1000-P-SP is a fixed "universal spring" platform designed to accommodate unique or non-standard vessels on orbital and shaker units. It is compatible with Benchmark Scientific shaker series.
This dedicated platform securely holds up to 4 x microplates, providing a stable surface for shaking, mixing, and incubation applications. The H1000-P-MP is compatible with the Benchmark Orbi-Shaker and Orbi-Shaker CO series, as well as other Benchma
This dedicated platform securely holds up to 12 x 125 mL Erlenmeyer flasks, providing a stable surface for shaking, mixing, and incubation applications. The H1000-P-125 is compatible with the Benchmark Orbi-Shaker and Orbi-Shaker CO series, as well a
This dedicated platform securely holds up to 6 x 250 mL Erlenmeyer flasks, providing a stable surface for shaking, mixing, and incubation applications. The H1000-P-250 is compatible with the Benchmark Orbi-Shaker and Orbi-Shaker CO series, as well as
This dedicated platform securely holds up to five 500 mL Erlenmeyer flasks, providing a stable surface for shaking, mixing, and incubation applications. The H1000-P-500 is compatible with the Benchmark Orbi-Shaker and Orbi-Shaker CO series, as well a
The Benchmark Scientific H1000 MR T600 is a MAGic Clamp tube rack accessory designed to hold 4 500 mL or 600 mL conical bottles. It works with MAGic Clamp-equipped orbital shakers and incubator shakers from Benchmark Scientific, such as the Orbi-Shak
The BT3000 MR is a MAGic Clamp Universal Platform (14 12 ) designed to securely hold flasks and tube racks during shaking or mixing operations. This platform is compatible with Benchmark Scientific orbital shaking units such as the Orbi Shaker series
The Benchmark Scientific BT4010 MR (MAGic Clamp universal platform, 16 16.5 in.) is an accessory designed for orbital shakers. It provides a versatile surface for flasks and tube racks, enabling secure mixing by using magnetic attachments that allow
The Benchmark Scientific BT300 RB is an adjustable roller platform accessory (8.5 10.5 ) designed for use with the Benchmark Scientific orbital shaker model Orbi Shaker JR (model BT302). It's specifically built to accommodate "uncommon vessels" (i.e.
The H1000 MR TSR is a MAGic Clamp tilted holder designed for use with tube racks (15 mL and 50 mL) on compatible shaker platforms. The H1000-MR MAGic Clamp universal platform can accommodate 2 x tilted tube racks. Being sold individually. MAGic Clamp
The Benchmark H1000 MR CMB is a MAGic Clamp COMBO accessory designed for use with compatible orbital or incubating shakers by Benchmark Scientific. It's adjustable and accommodates 125, 250 mL and 500 mL Erlenmeyer flasks. Sold individually MAGic Cla
The Benchmark Scientific H1000 MR T50 is a MAGic Clamp tube rack designed to hold up to 15 50 mL conical tubes, compatible with MAGic Clamp platforms on orbital rockers and shakers. The H1000-MR MAGic Clamp universal platform can accommodate 2 x H100
The Benchmark Scientific H1000 MR T15 is a MAGic Clamp tube rack accessory designed to hold 32 15 mL tubes on compatible orbital shakers. The H1000-MR MAGic Clamp universal platform can accommodate 2 x H1000 MR T15 tube racks. Being sold individually
The H1000 MR 1550 is a MAGic Clamp tube rack accessory by Benchmark Scientific designed for use on compatible shaker or rocker platforms. It accommodates 30 15 mL tubes and 20 50 mL tubes, providing a secure magnetic mounting system for mixed tube wo
The H1000 MR MP is a MAGic Clamp magnetic flask clamp accessory designed to securely hold one microplate on compatible orbital shakers from Benchmark Scientific. The H1000-MR MAGic Clamp universal platform can accommodate 6 x microplates. Being sold
The Benchmark Scientific H1000-MR-25 is a MAGic Clamp magnetic clamp for 25 mL Erlenmeyer flasks, designed for use with the MAGic Clamp platform accessory on compatible orbital shakers. Being sold individually. MAGic Clamp Configurations (sold indivi
The Benchmark Scientific H1000-MR-50 is a MAGic Clamp magnetic clamp for 50 mL Erlenmeyer flasks, designed for use with the MAGic Clamp platform accessory on compatible orbital shakers. The H1000-MR MAGic Clamp universal platform can accommodate 20 x
The Benchmark Scientific H1000-MR-125 is a MAGic Clamp magnetic clamp for 125 mL Erlenmeyer flasks, designed for use with the MAGic Clamp platform accessory on compatible orbital shakers. The H1000-MR MAGic Clamp universal platform can accommodate 12
The Benchmark Scientific H1000-MR-250 is a MAGic Clamp magnetic clamp for 250 mL Erlenmeyer flasks, designed for use with the MAGic Clamp platform accessory on compatible orbital shakers. The H1000-MR MAGic Clamp universal platform can accommodate 8
The Benchmark Scientific H1000-MR-500 is a MAGic Clamp magnetic clamp for 500 mL Erlenmeyer flasks, designed for use with the MAGic Clamp platform accessory on compatible orbital shakers. The H1000-MR MAGic Clamp universal platform can accommodate 6
The Benchmark Scientific H1000-MR-1000 is a MAGic Clamp magnetic clamp for 1000 mL Erlenmeyer flasks, designed for use with the MAGic Clamp platform accessory on compatible orbital shakers. The H1000-MR MAGic Clamp universal platform can accommodate
The Benchmark Scientific H1000 MR (MAGic Clamp universal platform, 9.5 11.5 in.) is an accessory designed for orbital shakers. It provides a versatile surface for flasks and tube racks, enabling secure mixing by using magnetic attachments that allow
The Benchmark Scientific B0718 is a set of four elastic bungee cord tie downs (working range approx 7 18 ) with hooks, designed for securing lab rockers and mixing platforms during use
The Benchmark Scientific B3D DIMPLED is a small dimpled accessory mat (10.5 7.5 ) designed to fit compatible 3 D rockers like the Benchmark Scientific Mini BlotBoy model
The Benchmark Scientific is a small, flat accessory mat from Benchmark Scientific, measuring 10.5 by 7.5 . It is a non-skid, autoclavable surface designed to provide a stable platform for tubes, vessels, and flasks during mixing.
Benchmark Scientific BR1000 DIMPLED is an optional dimpled mat accessory (12 12 ) designed for use with the Benchmark Scientific BenchBlotter BR1000 platform rocker
The BR1000 FLAT is a large flat mat accessory (12 12 ) designed for the Benchmark Scientific BR1000 series rockers - used to provide a stable, non-skid surface for placing lab vessels during mixing/work-surface use
The BR2000 FLAT is an extra-large, flat mat (14 12 ) accessory designed for use with the BR2000 BenchRocker 2D. It provides a stable, slip-resistant surface for flasks, plates and various lab vessels during mixing
The Benchmark Scientific BR2000 SP is a set of four platform separators that add 1.25 of clearance between stacked platforms. Compatible with all Benchmark Scientific stackable platforms. Comes win a pack/4.
The B3D STACK is a stacking platform accessory for the Benchmark Scientific series of lab rockers and shakers. It adds an additional elevated surface (10.5 7.5 ) with a flat mat and ~3.0 clearance, enabling more samples to be processed simultaneously
The BR2000 STACK is a large stacking platform (14" 14") with a flat mat, designed to be added on top of compatible lab rockers and shakers to increase usable surface area and accommodate more samples simultaneously. It is compatible with BR2000 Bench
The BR1000 STACK D is a large stacking platform accessory (12 12 ) with a dimpled mat designed for BenchBlotter Features: It provides approximately 3.0 ( 7.6 cm) of vertical clearance between the base and the stacked platform. The dimpled mat helps s
The B3D STACK D is a small stacking platform accessory with a dimpled mat (size 10.5 7.5 ) designed to be used with compatible 3D rockers. Features: It raises the usable surface area of a rocker by adding an elevated platform above the main deck (wit
The Benchmark Scientific B3D5000 DIMP is an optional dimpled mat accessory designed for use with the Benchmark Scientific B3D5000 BenchWaver 3D Rocker. It features recessed dimples to securely hold various tubes during mixing, helping prevent movemen
The B3D5000 STK is an optional stacking platform with flat mat designed for use with the Benchmark Scientific BenchWaver 3D (model B3D5000). Features: It provides additional usable surface area by stacking atop the main platform, giving roughly 4 ( 1
The Benchmark Scientific BR5000-STACK is an optional stacking platform designed to enhance the capacity and versatility of the Everlast 247 Rocker. This accessory allows users to add a second platform, effectively doubling the usable surface area for
The R4040-RP is a rocking platform accessory designed for use with the Benchmark Scientific RotoBot Mini (R4040) programmable rotator. It provides a gentle, back-and-forth rocking motion, ideal for applications such as gel staining, hybridization, an
The R4045-RP2 is a rocking platform accessory designed for use with the Benchmark Scientific RotoBot programmable rotator. It provides a gentle, back-and-forth rocking motion, ideal for applications such as gel staining, hybridization, and sample was
The R4040-HZ50 is a horizontal tube holder accessory designed for the Benchmark Scientific RotoBot Mini (R4040) and RotoBot (R4045) programmable rotators. This holder accommodates six 50 mL tubes (28-30 mm diameter) in a horizontal orientation, makin
The R4040-HZ15 is a horizontal tube holder accessory designed for use with the Benchmark Scientific RotoBot Mini (R4040) and RotoBot (R4045) programmable rotators. This holder accommodates six 15 mL tubes (16-17 mm diameter) in a horizontal orientati
The R4040 500 tube holder is designed for use with the Benchmark Scientific RotoBot rotators. It securely accommodates 1 50 mL tube (sold in a pack of 2), enabling reliable, simultaneous mixing of larger-volume samples. Supplied in a pack/2.
The Benchmark Scientific R4040 150 is a tube holder for the RotoBot Mini and RotoBot rotators. It accommodates a single 15 mL tube (16-17 mm diameter) in a vertical orientation, supplied as a pack of two
The R4040-1520 is a tube holder accessory designed for the Benchmark Scientific RotoBot Mini (R4040) and RotoBot (R4045) programmable rotators. This holder accommodates six 1.5/2.0 mL tubes and is available in a pack of two. Features: Tube Capacity:
The R2020-RP is a mini rocking platform accessory designed for use with the Benchmark Scientific Roto-Mini Plus (R2024) and Roto-Therm Plus (H2024) tube rotators. It facilitates gentle, uniform rocking motion, ideal for applications requiring consist
The Benchmark Scientific R2020-PCR is a specialized tube holder designed for use with the Roto-Mini Plus and Roto-Therm Plus series of tube rotators. This accessory is essential for laboratories conducting PCR (Polymerase Chain Reaction) experiments,
The Benchmark Scientific R2020-500 is a versatile tube holder designed for use with the Roto-Mini and Roto-Therm series of tube rotators. This holder accommodates six 50 mL tubes and twenty-four 0.5 mL tubes, providing flexibility for various laborat
The Benchmark Scientific R2020-150 is a tube holder accessory designed for use with the Roto-Mini and Roto-Therm series of tube rotators. This holder accommodates four 10-15 mL tubes and comes in a pack of two. Its primary function is to securely hol
The Benchmark Scientific R2020-0507 is a tube holder accessory designed for use with the Roto-Mini and Roto-Therm series of tube rotators. This holder accommodates five 5-7 mL tubes and comes in a pack of two. Its primary function is to securely hold
The Benchmark Scientific R2020-1520 is a tube holder accessory designed for use with the Roto-Mini and Roto-Therm series of tube rotators. This holder accommodates 11 tubes of 1.5 or 2.0 mL capacity and comes in a pack of two. Its primary function is
The Benchmark Scientific BV1010-50HQ is a horizontal tube rack designed for the BenchMixer XL and XLQ multi-tube vortexers. It accommodates 7 50 mL QuEChERS tubes, making it ideal for high-throughput applications such as pesticide residue analysis. K
The Benchmark Scientific BV1010-MP02 is a specialized rack designed for the BenchMixer XL and XLQ multi-tube vortexers. It holds up to 96 0.2 mL tubes or strips and is sold in packs of three. This accessory is ideal for high-throughput applications s
The Benchmark Scientific BV1010-MP is a specialized rack designed for the BenchMixer XL and XLQ multi-tube vortexers. It accommodates up to three standard microplates simultaneously, making it ideal for high-throughput applications such as ELISA assa
The Benchmark Scientific BV1010-25 Tube Rack is designed for use with the BenchMixer XL and XLQ multi-tube vortexers. It securely holds 15 tubes with a 25 mm diameter, making it ideal for laboratories requiring organized and efficient handling of mul
The Benchmark Scientific BV1010-500 Tube Rack is designed for use with the BenchMixer XL multi-tube vortexer. It securely holds 15 50 mL tubes with a 29 mm diameter, making it ideal for laboratories requiring organized and efficient handling of multi
The Benchmark Scientific BV1010-150 Tube Rack is designed for use with the BenchMixer XL multi-tube vortexer. It securely holds 50 15 mL tubes with a 16.5 mm diameter, making it ideal for laboratories requiring organized and efficient handling of mul
The Benchmark Scientific BV1010-13 Tube Rack is designed for the BenchMixer XL and XLQ multi-tube vortexers. It securely holds 50 tubes with a 13 mm diameter, making it ideal for mixing applications that require a moderate capacity. This rack is part
The Benchmark Scientific BV1010-12 Tube Rack is designed for the BenchMixer XL and XLQ multi-tube vortexers. It securely holds 50 tubes with a 12 mm diameter, making it ideal for mixing applications that require a moderate capacity. This rack is part
The BV1010 1520 tube-rack accessory is designed for use with the BenchMixer XL (BV1010). It securely holds 50 tubes of 1.5 mL or 2.0 mL (10 mm diameter) for simultaneous mixing
The Benchmark Scientific BV1010 05 is a tube rack accessory designed for the Benchmark Scientific BenchMixer XL (SKU BV1010). It holds 96 0.5 mL (8 mm diameter) micro-centrifuge tubes, allowing efficient simultaneous mixing of many small-volume sampl
The Benchmark Scientific BV1010-00 Foam Sheet without Holes is an accessory designed for the BenchMixer XL and XLQ multi-tube vortexers. Unlike standard foam inserts with pre-drilled holes, this foam sheet provides a solid, customizable surface. User
The Benchmark Scientific BV1007-T57 is a foam insert accessory for use with the BV1007 BenchMixer MP vortex mixer. It's designed to securely hold up to 16 tubes sized approximately 5-7 mL each (12-13 mm diameter) during mixing
The Benchmark Scientific BV1007 T05 is a foam insert accessory made for the Benchmark Scientific BenchMixer MP (BV1007) vortex mixer. It is designed to hold up to 70 tubes of 0.5 mL each - providing secure, simultaneous mixing of many small-volume sa
The Benchmark Scientific BV1000-H500 is an optional horizontal head attachment designed for the Benchmark BenchMixer series vortex mixers, including models BV1000, BV1003, and BV1005. Features: Tube Capacity: Holds up to 2 x 50 mL conical tubes simul
The Benchmark Scientific BV1000-H150 is an optional horizontal head attachment designed for use with the Benchmark BenchMixer series vortex mixers, including models BV1000, BV1003, and BV1005. Features: Tube Capacity: Holds up to 4 x 15 mL conical tu
The Benchmark Scientific BV1000-H15 is an optional horizontal head attachment designed for the Benchmark BenchMixer series vortex mixers, including models BV1000, BV1003, and BV1005. This accessory allows for the efficient mixing of up to 12 x 1.5 mL
The Benchmark Scientific BV1003-T500 is an optional foam rack accessory designed for the Benchmark BenchMixer V2 (model BV1003) vortex mixer. This rack is specifically engineered to securely hold up to 5 x 50 mL conical tubes during vortex mixing, fa
The Benchmark Scientific BV1003-T150 is an optional foam rack designed for use with the Benchmark BenchMixer V2 (model BV1003) vortex mixer. This accessory holds up to 12 x 15 mL conical tubes vertically, enabling efficient and simultaneous mixing of
The Benchmark Scientific BV1000-COMBO head is a versatile accessory designed for the Benchmark BenchMixer series vortex mixers, including models BV1000, BV1003, and BV1005. It allows for efficient mixing of various sample containers, enhancing the fl
The Benchmark Scientific BV1000-FLAT is a 3-inch flat head attachment designed for use with the BenchMixer series vortex mixers, including models BV1000, BV1003, and BV1005. This accessory is ideal for mixing applications that require a broader conta
The Benchmark Scientific B1000-01 is a loop holder attachment used with the BactiZapper infrared micro-sterilizer. It holds inoculating loops or needles in place during sterilization, making the process safer and easier by keeping hands away from the high-heat chamber.
Benchmark Scientific H5100-150 Block - This interchangeable thermal block fits the MultiTherm Touch system and holds 8 x15mL tubes, providing precise temperature control from 0 deg C to 105 deg C for heating, cooling, and mixing applications Features: Temperature control from 0 to 105 deg C
The BenchmarkScientific H1010-MR (MAGic Clamp universal platform, 18 x 18 in.) is an accessory designed for orbital shakers. It provides a versatile surface for flasks and tube racks, enabling secure mixing by using magnetic attachments that allow quick switching of flask sizes