10 lead 12 channel simulataneous 10-second resting ECG
296 (w) x 305.5 (h) x 92.5 (d) mm
Approximately 2.98 kg
3,6,12 channel and 1 channel (60 sec)
5, 10, 20 auto (I~aVF: 10, V1~V6:5) mm/mV
12.5, 25, 50 mm/s
AC (50/60 Hz, -20dB or better)
Muscle (25~35Hz, -3dB or better)
Base Line Drift (0.1Hz, -3dB or better)
Low pass filter (off, 40Hz, 100Hz, 150Hz)
2 x 16 character LCD display
Sensitivity, speed, filter status, HR, printing form, rhythm lead signal quality, power source, battery
Alphanumeric and symbol available
ID, name, age, sex, height, weight
Heart rate, PR, QRS, QT/QTc, P-R-T axis
Thermal print head, thermal roll paper
-Width: A4: 210mm or 8.5"
-Length: A4: 300mm or 11"
Effective writing width: 204mm
- Vertical: 8 dots/mm
- Horizontal: 16 dots/mm
Internal noise: 20uV(p-p) max
Input circuit: Floating input
Isolated and defibrillation protected
Input impedance: >10MQ
Input range: > +/- 5mV
Common Mode Rejection: > +100dB
DC offset voltage: > +/- 300mV
Time constant: 3.2 sec
Patient leakage current: <10uA
Frequency response: 0.05~150Hz
Disconnected lead detection
Power Supply: AC or built-in Battery (option)
Power requirement: 100 - 240 Vac, 50/60Hz, 1.0 - 0.5A
Power consumption: 60w max
1 hour of normal use (approximately 100 automatic ECG printouts)
PC connection with RS-232 interface and LAN
Class 1, Type BF
Operating humidity: 30~85%
Operating temperature: 10° ~40° C
Atmospheric pressure: 70 ~ 106 KPa
Power Cable - 1 ea.
Patient Cable - 1 ea.
Electrode - 10 ea.
Chart Paper - 1 ea.
Operation Manual - 1 ea.
Rechargeable Battery (ni-mh)
RS-232C null cable
LAN cable (Ethernet-RJ-45)
If you would like to send an email to our customer service
department, please fill in the form below and we answer
your request within 24 hours.