C 6040 CalWin is IKA's PC software for calorimetry, letting you save, evaluate, and transfer large volumes of measurement data to a laboratory information management system (LIMS). It can control multiple devices at once and works with IKA C 6000 global standards and isoperibol, C 1, C 200
The IKA PT 100.25 is a stainless steel immersion temperature sensor for use with IKA laboratory reactors in combination with the sensor receptacle LR 2000.60. It is compatible with ALMEMO temperature readers. Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See
Protective pipe, glass-coated. For use in acid and alkaline solutions. Compatible with ALMEMO temperature readers. Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here Specifications: Probe type Immersion probe Sensor type PT100 (DIN IEC 751 Class A)
Standard sensor for a wide range of laboratory tasks. Compatible with ALMEMO temperature readers. Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here Specifications: Probe type Immersion probe Sensor type PT100 (DIN IEC 751 Class A) Temperature
The ALMEMO 2490-2 allows to connect up to two sensors with the special ALMEMO plugs (see list of accessories) for pH and/or Temperature measurement. The measured values are shown on the display or can be transferred to a PC. Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's
Labworldsoft 6 Visc software enables the Automation of laboratory processes by connecting ROTAVISC viscometers, STARVISC 200-2.5 control or LR-2.ST Starvisc 200 to other devices such as a thermostat or pH Meter through a PC. Measurement processes and parameters can thus be easily recorded for
The laboratory software labworldsoft 6 Reactor enables monitoring, control and data recording for IKA reactor systems using a PC. By using modules, process automation is possible within a very short time to ensure defined, controlled and reproducible reaction conditions at any time. This gives you
The laboratory software labworldsoft 6 Screening System enables the screening and automation of electrosynthesis with the IKA - Screening System. On the PC, processes can be automated, reaction parameters can be defined and experiment data can be easily recorded. The data can be used for reaction
The Labworldsoft 6 Starter Upgrade allows you to upgrade your existing software to the Labworldsoft 6 PRO version and benefit from even more complex data analysis. Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here *This product is not returnable in
The labworldsoft 6 Starter Update allows you to update your existing labworldsoft 6 Starter license. You will be able to use newer versions of labworldsoft 6 for one more year. Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here *This product is not
The labworldsoft 6 Pro Update allows you to update your existing labworldsoft 6 Pro license. You will be able to use newer versions of labworldsoft 6 for one more year. Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here *This product is not returnable
Labworldsoft 6 Starter lab software is unique on the market and the cockpit for your digital laboratory. The Starter version is the entry-level model from the labworldsoft family and ideally suited for smaller configurations. With the help of a PC laboratory processes can be Automated, measured
Labworldsoft 6 Advanced lab software is unique on the market and the cockpit for your digital laboratory. On the PC, you are able to automate laboratory processes, store your own recipes and process flows, or perform calculations during the experiment. Check the IKA website here for software and
The IKA PC 2.2 Adapter converts a 9-pin (F) to a 25-pin (M) RS232 connection for use with IKA equipment. Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here Specifications: Weight 0.043 kg Permissible ambient temperature 5 - 40 deg C
The IKA PC 1.4 is an RS232 adapter that converts from a 9 pin (F) connector to a 15 pin (M) connector. Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here
The IKA PC 1.2 is an RS 232 adapter that converts a 9 pin connector to a 25 pin connector. It lets IKA laboratory instruments with a 9 pin interface connect to a PC serial port of the older 25 pin type. Country of Origin: Germany Warranty: Comes with 2+1 Year Warranty. See details here
IKA DTM 12.10 Data Cable for ALMEMO, 2.5 meters, 3127800. Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here Specifications: Depth 1500 mm Weight 0.075 kg Permissible ambient temperature 5 - 40 deg C
The IKA PC 2.1 is a 5-meter RS 232 cable for connecting IKA laboratory devices to a PC for remote control and data logging, for example with IKA labworldsoft software. Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here Specifications: Weight 0.165 kg
IKA - PC 1.5 RS 232 Cable, 2.5 meters, 2756000. The length is 2.5 meters. Compatible with various IKA - equipment. Check the IKA website here for product compatibility information. Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here Specifications:
The IKA PC 1.1 RS 232 cable has a 9-pin connector with male and female ends and a length of 3 meters. It is compatible with various IKA equipment. Check the IKA website here for product compatibility information. Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See
Description: Up to 4 lab units can be controlled through the ethernet with the PC 4.1 RS 232 server. The server supports 4 RS 232 ports with a 10/100 mbps ethernet interface by TCP/IP. The server can be set up through the ethernet and works as a transparent serial COM-Port without restrictions of
For mounting in the PC to connect up to 8 instruments simultaneously. Plug-in cards for up to 64 instruments are also available on request. Please inquire (*special order). Compatible with LR 1000 Basic and LR 1000 Control laboratory reactors. *Special order items are not returnable in any