

The IKA RH lite is a compact, affordable entry-level magnetic hotplate stirrer built for simple and routine laboratory work. It pairs an energy-efficient EC motor delivering speeds up to 1500 rpm with 600 W of heating power and a robust 135 mm aluminum heating plate rated to 310 deg C. Two
The IKA Mixter add-on unit is an expansion unit for existing IKA MIXSTER magnetic stirrer systems. It is supplied without a power supply or accessories. Verify that your current power supply can support the total number of connected IKA MIXSTER units: Up to 2 units: use the power supply included
The IKA H 135.26 is a flask carrier with an integrated handle designed for use with IKA H 135 series magnetic stirrers and hotplate stirrers. It securely holds a single round-bottom flask of up to 250 ml, ensuring stable and even heat transfer during stirring and heating applications. Machined from
The IKA C-MAG HS 10 is the largest analog model in the C-MAG range, built around a chemically resistant ceramic plate with a 260 x 260 mm work surface for stirring volumes of up to 15 litres (H2O). Its 1500 W heat output makes it well suited to large vessels and high-throughput laboratory tasks.
The IKA C-MAG HS 7 control is a premium, fully controllable heating magnetic stirrer with a chemically resistant ceramic plate (180 x 180 mm) and a powerful 9 W drive that handles volumes of up to 20 litres (H2O) across a 50-1500 rpm range. Dual LCD displays show both set and actual speed and
Triangular PTFE-coated magnetic stir bar for mixing difficult-to-dissolve samples and preventing sedimentation. Its scraper-like shape provides strong turbulence at low speeds, ideal for dissolving solids and stirring up precipitates. Dimensions (L x ): 80 x 18 mm. The PTFE coating is chemically
Triangular PTFE-coated magnetic stir bar for mixing difficult-to-dissolve samples and preventing sedimentation. Its scraper-like shape provides strong turbulence at low speeds, ideal for dissolving solids and stirring up precipitates. Dimensions (L x ): 55 x 14 mm. The PTFE coating is chemically
Triangular PTFE-coated magnetic stir bar for mixing difficult-to-dissolve samples and preventing sedimentation. Its scraper-like shape provides strong turbulence at low speeds, ideal for dissolving solids and stirring up precipitates. Dimensions (L x ): 35 x 9 mm. The PTFE coating is chemically
Triangular PTFE-coated magnetic stir bar for mixing difficult-to-dissolve samples and preventing sedimentation. Its scraper-like shape provides strong turbulence at low speeds, ideal for dissolving solids and stirring up precipitates. Dimensions (L x ): 25 x 8 mm. The PTFE coating is chemically
For all stirring bars up to 80 mm in length, PTFE-coated. Length: 350 mm, Diameter: 8 mm. Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here Specifications: Weight 0.048 kg Permissible ambient temperature 5-40 deg C
The RS 2 set assembles nine IKA FLON and TRIKA magnetic stirring bars in a variety of shapes, giving a laboratory the flexibility to match the right bar to different vessels and mixing tasks. The assortment spans round, glass-coated, power, slide-round, ellipse, cross, crown and bone IKAFLON shapes
The RS 1 set brings together ten IKA FLON and TRIKA magnetic stirring bars, giving a laboratory a versatile range of lengths and shapes for different vessels and volumes. The assortment contains eight IKAFLON bars (sizes 10, 15, 20, 25, 30, 40, 50 and 80) plus two TRIKA triangular bars (25 and 42).
Thanks to symmetrical laminates on both sides, this magnetic stir bar can be used in tall vessels with small diameters, making it ideal for cuvettes and test tubes. Dimensions ( x H): 9 x 6 mm. The PTFE coating is chemically inert and resistant to aggressive chemicals. Supplied as a set of 5.
The IKAFLON 74 beaker is a PTFE-coated magnetic stirring bar designed for low speeds in cell and tissue culture applications. Its basket acts as a partition to improve mixing results, producing no shear effect on the vessel bottom and very quiet operation in beakers even when the bottom is uneven.
The IKAFLON 54 bone is a PTFE-coated magnetic stirring bar that provides strong turbulence at relatively low speeds. Its bone shape gives reduced surface contact and outstanding centering, especially in vessels with arched bottoms, while fixed disks on both sides ensure efficient mixing and high
Bone-shaped PTFE magnetic stirring bar that generates strong turbulence at relatively low speeds. Reduced surface contact and excellent centering make it especially effective in vessels with arched bottoms, while fixed disks on both sides ensure efficient mixing and high stability. The PTFE coating
Cross-shaped PTFE magnetic stirring bar that delivers stable, quiet stirring even at high speeds, with deep turbulence for fast, efficient mixing and effective performance at low speeds for biological applications. The PTFE coating is chemically inert. Dimensions (L x ): 38 x 38 mm, with an Alnico
The IKAFLON 30 cross magnetic stirring bar features a cross shape that creates deep turbulence for fast, efficient mixing and stable, quiet stirring even at high speeds. Its PTFE coating is chemically inert and resistant to aggressive chemicals. Dimensions (L x ): 30 x 30 mm, with an Alnico V
The IKAFLON 25 cross magnetic stirring bar features a cross shape that creates deep turbulence for fast, efficient and quiet mixing, even at high or low speeds. It has a chemically inert PTFE coating over an Alnico V magnet, measures 25 x 25 mm (L x ), and withstands a maximum working temperature
The IKAFLON 20 cross magnetic stirring bar delivers stable, quiet stirring even at high speeds, with a cross shape that generates deep turbulence for fast, efficient mixing. It stays efficient at low speeds for biological applications and turns on the bottom of the vessel to prevent sedimentation.
The IKAFLON 10 cross is a PTFE-coated magnetic stirring bar supplied as a set of 5. Its cross shape creates deep turbulence for fast, efficient mixing and provides stable, quiet stirring even at high speeds, while remaining effective at low speeds for biological applications. The bar turns on the
The IKAFLON 70 ellipse is a PTFE-coated elliptical magnetic stirring bar well-suited for use in round beakers, where its elliptical form ensures homogenous mixing and provides minimal contact when used in plastic containers. The PTFE coating is chemically inert and resistant to aggressive
Elliptical PTFE-coated magnetic stirring bar whose shape ensures homogenous mixing and is especially well-suited to round beakers, with minimal contact when used in plastic containers. The PTFE coating is chemically inert and resistant to aggressive chemicals. Dimensions (L x ): 50 x 20 mm, with an
Elliptical magnetic stir bars are well-suited for use in round beakers, where the elliptical form ensures homogenous mixing. They offer minimal contact when used in plastic containers. The PTFE coating is chemically inert and resistant to aggressive chemicals. Dimensions (L x ): 40 x 20 mm. Country
Elliptical magnetic stir bars are well-suited for use in round beakers, where the elliptical form ensures homogenous mixing. They offer minimal contact when used in plastic containers. The PTFE coating is chemically inert and resistant to aggressive chemicals. Dimensions (L x ): 35 x 15 mm. Country
The IKAFLON 30 ellipse magnetic stirring bar is well-suited for round beakers, its elliptical form ensuring homogenous mixing with minimal contact in plastic containers. The PTFE coating is chemically inert and resistant to aggressive chemicals. Dimensions (L x ): 30 x 15 mm, with an Alnico V
The IKAFLON 25 ellipse magnetic stirring bar has an elliptical shape that ensures homogeneous mixing and is well suited to round beakers, with minimal contact in plastic vessels. It has a chemically inert PTFE coating over an Alnico V magnet, measures 25 x 12 mm (L x ), and withstands a maximum
The IKAFLON 20 ellipse magnetic stirring bar is well-suited for use in round beakers, where its elliptical form ensures homogenous mixing. It also offers minimal contact when used in plastic containers. Dimensions (L x ): 20 x 10 mm. The PTFE coating is chemically inert and resistant to aggressive
The IKAFLON 50 slide round is a cylindrical PTFE-coated magnetic stirring bar with an integrated pivot ring that provides outstanding centering, consistent mixing, and reduced vibrations and wear. It is designed for use in containers with uneven or curved bottoms, and the PTFE coating is chemically
Cylindrical PTFE-coated magnetic stirring bar with an integrated pivot ring that delivers outstanding centering, consistent mixing and reduced vibration and wear, keeping the optimum stirring position even in containers with uneven or curved bottoms. The PTFE coating is chemically inert and
The IKAFLON 30 slide round magnetic stirring bar has a cylindrical form with an integrated pivot ring that provides outstanding centering, reduces vibrations and wear, and maintains the optimum stirring position in containers with uneven or curved bottoms. The PTFE coating is chemically inert and
The IKAFLON 25 slide round magnetic stirring bar has pivot rings that provide outstanding self-centering and consistent, low-friction mixing. It has a chemically inert PTFE coating over an Alnico V magnet, measures 25 x 6 mm (L x ), and withstands a maximum working temperature of 280 deg C.
Round PTFE-coated magnetic stirring bar built with a highly magnetic rare-earth samarium-cobalt (SmCo) core, delivering greater torque than conventional stir bars for optimum mixing in larger vessels, graduated cylinders and viscous liquids. The chemically inert PTFE coating resists aggressive
The IKAFLON 30 power round magnetic stirring bar is made of highly magnetic rare-earth samarium-cobalt (SmCo) material, allowing greater torque than conventional stir bars for optimum mixing in larger vessels and graduated cylinders. The PTFE coating is chemically inert and resistant to aggressive
The IKAFLON 20 power magnetic stirring bar is made of a highly magnetic rare-earth samarium-cobalt material, allowing greater torque than conventional stir bars. It provides optimum mixing in larger-volume vessels and large graduated cylinders, and is well suited to high-temperature applications
Round, glass-coated magnetic stirring bar whose smooth surface prevents penetration and absorption of contaminated materials and is easy to clean. Suited to highly abrasive media and high-temperature applications for which PTFE is unsuited, making it ideal for high-purity work and trace analysis.
These round, glass-coated stirring bars have a smooth surface that prevents penetration of contaminated materials and is easy to clean. The glass coating suits highly abrasive media and high-temperature applications where PTFE is unsuitable, making them ideal for high-purity work and trace
The IKAFLON 25 glass round magnetic stirring bar features a glass coating that is ideal for aggressive media and high-temperature applications. The Alnico V magnet is fully encased in glass, the bar measures 25 x 8 mm (L x ), and it withstands a maximum working temperature of 525 deg C. Supplied as
Round, cylindrical stir bar without pivot ring for even mixing, suitable for a wide variety of vessels with flat bottoms. Dimensions (L x ): 80 x 8 mm. The PTFE coating is chemically inert and resistant to aggressive chemicals. Supplied as a set of 5. Country of Origin: Germany Warranty: Comes with
The IKAFLON 50 round is a cylindrical PTFE-coated magnetic stirring bar with a round form and no pivot ring, ensuring even mixing. It is suitable for a variety of vessels with flat bottoms, and the PTFE coating is chemically inert. Dimensions (L x ): 50 x 8 mm. Alnico V magnet with normal magnetic
Round, cylindrical PTFE-coated magnetic stirring bar with no pivot ring, giving even mixing in a wide variety of flat-bottomed vessels as a universal stirrer. The PTFE coating is chemically inert and resistant to aggressive chemicals. Dimensions (L x ): 40 x 8 mm, with an Alnico V magnet. Supplied
The IKAFLON 30 round magnetic stirring bar has a cylindrical form without pivot ring for even mixing, making it a universal stirrer suitable for a variety of flat-bottomed vessels. The PTFE coating is chemically inert and resistant to aggressive chemicals. Dimensions (L x ): 30 x 8 mm, with an
The IKAFLON 25 round magnetic stirring bar is a versatile cylindrical stir bar for general laboratory mixing. It has a chemically inert PTFE coating over an Alnico V magnet, measures 25 x 8 mm (L x ), and withstands a maximum working temperature of 280 deg C. Supplied as a set of 5. Country of
The IKAFLON 20 round is a PTFE-coated magnetic stirring bar supplied as a set of 5. Its round, cylindrical form without pivot ring ensures even mixing across a wide range of applications. It is suitable for a variety of vessels with flat bottoms, and the PTFE coating is chemically inert and
The IKAFLON 15 round is a PTFE-coated magnetic stirring bar supplied as a set of 5. Its round, cylindrical form without pivot ring ensures even mixing and makes it a universal stirrer for a wide variety of applications. It is suitable for a variety of vessels with flat bottoms, and the PTFE coating
The IKAFLON 155 round is a large, round, PTFE-coated magnetic stirring bar. Its cylindrical form provides even mixing in larger vessels, and the PTFE coating is chemically inert and resistant to aggressive chemicals. Dimensions (L x ): 155 x 27 mm. Country of Origin: Germany Warranty: Comes with
The IKAFLON 110 round is a large round, PTFE-coated magnetic stirring bar for use in larger vessels. The PTFE coating is chemically inert and resistant to aggressive chemicals. Dimensions (L x ): 108 x 27 mm; supplied as a single bar. Country of Origin: Germany Warranty: Comes with 2+1 Year
Suitable for mixing difficult to dissolve samples or to prevent sedimentation. Provides strong turbulence at low speeds. The scraper-like shape is perfect for the dissolution of solids and stirring up precipitates. The PTFE coating is chemically inert and resistant to aggressive chemicals.
The BC 1000 beaker cap can be used with 1000 ml and 600 ml beakers for dispersing and stirring experiments. It prevents splashing and reduces noise while stirring and dispersing. Made of silicone, resistant to most acidic and alkaline media. Diameter: 130 mm. Country of Origin: Germany Warranty:
The HG 1000 heating jacket is used with IKA magnetic stirrers with heating or heating plates. It improves heat transfer into the medium and can significantly cut down heating time. For 1000 ml beakers. Material: Aluminum, Dimensions: 126 x 50 mm, Inner diameter: 106 mm. Country of Origin: Germany
The HG 600 heating jacket is used with IKA magnetic stirrers with heating or heating plates. It improves heat transfer into the medium and can significantly cut down heating time. For 600 ml beakers. Material: Aluminum, Dimensions: 111 x 50 mm, Inner diameter: 91 mm. Country of Origin: Germany
The oil bath attachment H 30 can be used as oil baths together with an IKA MAG magnetic stirrer with heating or with an IKA THERM heating plate having a diameter of 135 mm. Positioning border prevents sliding on the heating plate Safety grip protects from bath attachment burns Made of aluminum for
The oil bath attachment H 29 can be used as oil baths together with an IKA MAG magnetic stirrer with heating or with an IKA THERM heating plate having a diameter of 135 mm. Positioning border prevents sliding on the heating plate Safety grip protects from bath attachment burns The bath attachment
Pot, stainless steel, 5 l Inner: 220 mm Height: 142 mm Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here Specifications: Inner diameter 220.0 mm Bottom shape hollow cylindrical Useable volume max. 5000 ml Material stainless steel 1.4301 Height 142.0
Pot, stainless steel, 3 l Inner: 180 mm Height: 119 mm Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here Specifications: Inner diameter 180.0 mm Bottom shape hollow cylindrical Useable volume max. 3000 ml Material stainless steel 1.4301 Height 119 mm
Pot, stainless steel, 1 l Inner: 160 mm Height: 79 mm Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here Specifications: Inner diameter 160.0 mm Bottom shape flat Useable volume max. 1000 ml Material stainless steel 1.4301 Height 79 mm Weight 1.138 kg
The IKA H 44 boss head clamp secures the H 38 holding rod to the H 16 V support rod, providing a stable connection for laboratory stand assemblies. It offers a stand clamping range of 10 - 11 mm and an extension-arm clamping range of 11 mm, and is made of cast aluminum for durability. Country of
The IKA H 38 Holding Rod secures a temperature sensor or an ETS-D5/D6 controller with an H 44 boss head clamp to the H 16 V support rod. This stainless steel rod adds a mounting point to the support stand, holding probes in position over the vessel on IKA magnetic stirrers and hot plates. Country
The IKA H 16.3 Extension lengthens the H 16 V support rod so it can be used with a bath attachment larger than 180 mm in diameter. This machined extension threads onto the existing support rod, providing the extra reach needed for oversized bath setups on IKA magnetic stirrers. Country of Origin:
Stainless steel support rod (AISI 304) for all IKA magnetic stirrers fitted with an M 10 threaded bushing. Diameter: 10 mm Length: 450 mm Material: stainless steel (AISI 304) Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here Specifications: Diameter
Compatible with all IKA equipment Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here
To separate the casing from the sensor. The casing with the electronics may be kept away from dangerous vapor released by the medium (for use with ETS-D5 and ETS-D6). Length: 1 m. Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here Specifications:
Silicone protective cover designed for the IKA RCT digital and RCT basic magnetic stirrers. Made from silicone that resists most acids, alkalis and organic solvents, helping to protect the instrument during routine laboratory use. Country of Origin: Germany Warranty: Comes with 2+1 Year
Protective silicone cover designed for the IKA RET control-visc and RET control-visc white magnetic stirrers. Helps protect the instrument housing from spills and contamination during everyday laboratory work. Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See
Protective silicone cover designed for the IKA RH digital and RH digital White magnetic hotplate stirrers. Helps shield the stirrer housing from spills and contamination during routine laboratory use. Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here
The IKA H 102 is a form-fitting silicone protective cover designed for use with the RH basic magnetic hotplate stirrer. It helps shield the instrument from spills and contamination during routine laboratory work. Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See
The H 100 protective cover fits RET basic (36220XX) and RCT basic magnetic stirrers with a production year before 2022 (33800XX and 38100XX). It resists most acids, alkaline solutions and organic solvents. Made of silicone, with a maximum temperature of 135 deg C. Country of Origin: Germany
The IKA Plate Adapter lets you mount heating and reaction blocks on compatible IKA heating magnetic stirrers and hotplates. It extends the versatility of your bench unit so a single instrument can drive block-based heating and sample-processing workflows. It fits the C-MAG HS 7 and HS 10 series
The IKA WiCo RET control-visc is a wireless remote controller that lets you operate compatible RET control-visc magnetic hotplate stirrers from a distance, keeping you safely away from the working area while maintaining full command of your process. Powered by a rechargeable 2000 mAh
The IKA TW.PWR.2 is a power supply used to upgrade IKA TWISTER (now MIXSTER) SETs 1 through 4, allowing a single setup to run up to 30 devices. The device-side plug is supplied as part of the scope of delivery, so the unit is ready to connect on arrival. Package Includes: TW.PWR.2 power supply
The TW.CABLE connection cable (0.5 m) electrically links separate clusters of TWISTER devices, allowing the connected clusters to run from a single power supply. Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here Specifications: Width 500 mm Weight
Used with the MS 3.3 universal attachment, the STICKMAX II adhesive mat is ideal for shaking sample vessels of up to 500 ml, such as Erlenmeyer or cell culture flasks. Its strong adhesive surface holds the vessels securely on the shaker. Adjust the speed to suit the load and vessel size (maximum
The TW.IX.23 vessel holder accommodates nine sample vessels with a diameter of 23 mm and mounts easily onto the TW.IX multi-position attachment, simplifying sample handling and keeping the vessels from tipping over during mixing. For mixing at high speeds, use the included TW.IX.ANTISLIP mat to
The TW.IX.28 vessel holder accommodates nine sample vessels with a diameter of 28 mm and mounts easily onto the TW.IX multi-position attachment, simplifying sample handling and keeping the vessels from tipping over during mixing. For mixing at high speeds, use the included TW.IX.ANTISLIP mat to
The IKA TW.VX shaking attachment converts an IKA Twister (MIXSTER) magnetic stirrer into a fully functional vortex and orbital shaker. It secures to the base unit via an integrated adhesive pad and can be mounted or removed as often as needed using the supplied tool. Paired with the STICKMAX II
The TW.IX multi-position stirring attachment expands the IKA Twister magnetic stirrer from 1 to 9 stirring positions. It is suited for mixing in small sample vessels with diameters of 23 - 28 mm and volumes of 8 - 60 ml. Each of the nine positions has its own magnetic drive for powerful mixing of
The IKA H 135.51 is a 2,000 ml flask carrier fitted with a handle for the safe, convenient handling of round-bottom flasks. Its hollow cylindrical bottom cradles the vessel securely during heating and stirring operations. Machined from anodized aluminum, the carrier withstands working temperatures
The IKA H 135.501 is a round-bottom flask inlay that allows a larger flask carrier to hold 1,000 ml flasks, with an inner diameter of 134.5 mm. It is made from anodized aluminum for reliable heat transfer and is rated for working temperatures up to 300 deg C. This insert is designed to be used
The IKA H 135.50 is a flask carrier designed to hold 2,000 ml round-bottom flasks, with a maximum outer diameter of 194.7 mm. It is made from anodized aluminum for effective heat transfer and withstands working temperatures up to 300 deg C. Country of Origin: Germany Warranty: Comes with 2+1 Year
The IKA H 135.41 is a flask carrier with an integrated handle, designed to hold 1,000 ml round-bottom flasks and measuring 166.3 mm in outer diameter. It is built from anodized aluminum for efficient heat transfer and supports working temperatures up to 300 deg C. To accommodate smaller flasks,
The IKA H 135.401 is a round-bottom flask inlay that reduces a 1,000 ml carrier to accept 500 ml flasks, featuring a 107.5 mm inner diameter and anodized aluminum construction rated to 300 deg C. This insert requires either the H 135.40 flask carrier (1,000 ml, without handle) or the H 135.41 flask
The IKA H 135.40 is a flask carrier designed to hold 1,000 ml round-bottom flasks, with an outer diameter of 166.3 mm. Its anodized aluminum construction provides efficient heat transfer and supports working temperatures up to 300 deg C. To accommodate smaller flasks, matching inserts are available
The IKA H 135.31 is a flask carrier with an integrated handle, sized for 500 ml round-bottom flasks and featuring a 142 mm outer diameter for stable heating and stirring. To accommodate smaller flasks, matching inlays are available separately as accessories (H 135.30x series). Built from anodized
The IKA H 135.302 is a round-bottom flask inlay with a 250 ml capacity and an 87.5 mm inner diameter, holding round-bottom flasks firmly in place while heating and stirring. It is intended for use with an H 135.30 (500 ml, without handle) or H 135.31 (500 ml, with handle) flask carrier. The
The IKA H 135.301 is a round-bottom flask inlay with a 100 ml capacity and a 66 mm inner diameter, designed to hold smaller round-bottom flasks securely during heating and stirring. It must be used together with an H 135.30 (500 ml, without handle) or H 135.31 (500 ml, with handle) flask carrier.
The IKA H 135.30 is a 500 ml flask carrier for use with IKA H 135 series magnetic stirrers and hotplate stirrers. It holds a single round-bottom flask securely in place for uniform heat transfer during stirring and heating. Manufactured from anodized aluminum with a hollow cylindrical bottom, the
The IKA H 135.25 is a 250 ml flask carrier that holds round-bottom flasks on IKA magnetic stirrers. Machined from anodized aluminum, it provides durable, corrosion-resistant heat transfer for demanding laboratory work. The carrier features a hollow-cylindrical bottom with a single 87.5 mm seat and
The IKA H 135.21 is a 100 ml flask carrier with a handle, designed to hold round-bottom flasks on IKA magnetic stirrers. Machined from anodized aluminum, it delivers robust, corrosion-resistant heat transfer for reliable everyday use. The carrier has a hollow-cylindrical bottom with a single 66.0
The IKA H 135.203 is a round-bottom flask inlay with a usable volume of 50 ml, designed to hold round-bottom flasks securely on IKA magnetic stirrers. It is manufactured from anodized aluminum for lasting, corrosion-resistant service. The inlay provides a single spherical seat with a 52.5 mm inner
The IKA H 135.202 is a round-bottom flask inlay with a usable volume of 25 ml, designed to securely hold round-bottom flasks on IKA magnetic stirrers. It is machined from anodized aluminum for durable, corrosion-resistant performance. Country of Origin: Germany Warranty: Comes with 2+1 Year
The IKA H 135.201 is an anodized aluminum flask inlay that adapts an IKA H 135 flask carrier to hold a 10 ml round-bottom flask, with a 33.5 mm inner diameter and heating up to 300 deg C. The inlay requires either the H 135.20 flask carrier (100 ml, without handle) or the H 135.21 flask carrier
The IKA H 135.20 is an anodized aluminum flask carrier designed to hold 100 ml round-bottom flasks for use with IKA H 135 dry block heating systems, with a maximum outer diameter of 142 mm and heating up to 300 deg C. To accommodate smaller flasks, matching inserts are available separately as H
The IKA H 135.11 square carrier with handle holds up to four blocks of the H 135.10x series, making it easy to transport and organize heating blocks on compatible magnetic stirrers. It features a flat bottom with 160 x 160 mm dimensions and is made of anodized aluminum for durable,
The IKA H 135.108 is an anodized aluminum heating block with a single round-bottom well sized for a 250 ml vessel, for use with IKA H 135 dry block heating systems. It provides uniform, controlled heating up to 300 deg C. The block requires either the H 135.10 support plate without handle or the H
The IKA H 135.107 is an anodized aluminum heating block featuring a single round-bottom well sized for a 100 ml vessel, designed for use with IKA H 135 dry block heating systems. It delivers uniform, controlled heating up to 300 deg C. The block requires either the H 135.10 support plate without
The IKA H 135.106 is an anodized aluminum heating block with four flat-bottom holes, each accepting a 40 ml vessel, for use with IKA H 135 dry block heating systems. It supports precise, uniform sample heating up to 300 deg C. The block requires either the H 135.10 support plate without handle or
The IKA H 135.105 is a flat-bottom aluminum heating block designed to hold four 30 ml vessels for temperature-controlled sample processing on compatible IKA magnetic stirrer hotplates. Its anodized aluminum construction ensures even heat transfer for reliable, uniform heating. The block features 4
The IKA H 135.104 is a flat-bottom aluminum heating block designed to hold four 20 ml vessels for temperature-controlled sample processing on compatible IKA magnetic stirrer hotplates. Its anodized aluminum construction ensures even heat transfer for reliable, uniform heating. The block features 4
The IKA H 135.103 is a flat-bottom aluminum heating block designed to hold nine 16 ml vessels for temperature-controlled sample processing on compatible IKA magnetic stirrer hotplates. Its anodized aluminum construction ensures even heat transfer for reliable, uniform heating. The block features 9
The IKA H 135.102 is a flat-bottom aluminum heating block designed to hold sixteen 8 ml vessels for temperature-controlled sample processing on compatible IKA magnetic stirrer hotplates. Its anodized aluminum construction ensures even heat transfer for reliable, uniform heating. The block features
The IKA H 135.101 is a flat-bottom aluminum heating block designed to hold sixteen 4 ml vessels for temperature-controlled sample processing on compatible IKA magnetic stirrer hotplates. Its anodized aluminum construction provides even heat transfer for reliable, uniform heating. The block features
The IKA H 135.10 square carrier holds up to four blocks of the H 135.10x series, providing an organized platform for heating-block applications on compatible magnetic stirrers. It features a flat bottom with 160 x 160 mm dimensions and is made of anodized aluminum for durable, corrosion-resistant
For use with RCT basic, RET basic and C-MAG HS digital series. -Immersion depth: 230 mm -Diameter: 3 mm -Material: AISI 316 Ti, coated Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here Specifications: Probe type Immersion probe Sensor type PT1000
Made of stainless steel, for use with RCT basic, RET basic and C-MAG HS digital series. -Immersion depth: 150 mm -Diameter: 3 mm -Material: AISI 316 Ti Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here Specifications: Probe type Immersion probe
For use with RCT basic, RET basic and C-MAG HS digital series. Glass-coated temperature sensor for work with aggressive media such as acid and alkaline solutions. -Depth of immersion: 230 mm -Diameter: 7 mm -Material: borosilicate glass 3.3 Country of Origin: Germany Warranty: Comes with 2+1 Year
Made of stainless steel, for use with RCT series, RET basic and C-MAG HS digital / control series. -Depth of immersion: 230 mm -Diameter: 3 mm -Material: AISI 316 Ti Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here Specifications: Probe type
Two separate steel sensors (glass-coated) for heat transfer fluid and medium. Ideal for the magnetic stirrers RET control-visc and RET control-visc white. -Depth of immersion: 230 mm -Diameter: 8 mm -Material: borosilicate glass 3.3 Country of Origin: Germany Warranty: Comes with 2+1 Year
Two separate steel sensors for heat transfer fluid and medium. Ideal for the magnetic stirrers RET control-visc and RET control-visc white. -Depth of immersion: 230 mm -Diameter: 3 mm -Material: AISI 316 Ti Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See
For use with RET control-visc and RET control-visc white -Depth of immersion: 230 mm -Diameter: 3 mm -Material: AISI 316 Ti Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here Specifications: Probe type Immersion probe Sensor type PT100 (DIN IEC 751
Temperature sensor for RET control-visc and RET control-visc white, coated with SafeCoat, 3 mm, 230 mm length. Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here Specifications: Probe type Immersion probe Sensor type PT100 (DIN IEC 751 Class A)
For use with RET control-visc and RET control-visc white, glass-coated for work with aggressive media such as acid and alkaline solutions. -Depth of immersion: 230 mm -Diameter: 8 mm Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here Specifications:
Compatible with the IKA - RET Control-visc magnetic stirrers Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here Specifications: Probe type Immersion probe Sensor type PT100 (DIN IEC 751 Class A) Accuracy of temperature measurement [K] (0.15 + 0.2%
The IKA i-Mag SP150 is a robust stainless steel set-up frame that extends the footprint and load capacity of the I-MAG industrial magnetic stirrer. It is built for barrels of up to roughly 150 liters and a maximum load of 200 kg, and accommodates vessels from 300 mm up to 500 mm in diameter.
The IKA i-Mag SP300 is a robust stainless steel set-up frame that extends the footprint and load capacity of the I-MAG industrial magnetic stirrer. It is built for barrels of up to roughly 300 liters and a maximum load of 400 kg, and accommodates vessels up to 700 mm in diameter (minimum 300 mm).
The IKA i-Mag Hand Cart is a transport trolley and platform designed for the I-MAG magnetic stirrer, letting you move and position barrels of up to 300 liters with ease. Built from stainless steel for durability, it supports a maximum load of 400 kg. Country of Origin: Germany Warranty: Comes with
Universal magnetic stirring bar remover for large magnetic stirring bars. Includes mechanical coupling for removing the IKA FLON 118 float mounted stirring drive. -Length: 1.04 m -Material: PTFE, VMQ (FDA-compliant) Note: Before removing stirring bars from large vessels, please remove the I-MAG
Powerful round stirring drive for wear-free mixing in large vessels. The PPS (FDA-compliant) magnetic rod floats contactlessly above the container bottom, avoiding friction and wear on both the container and the magnet, making it especially suited to abrasive media and soft container materials.
The IKA I-Mag BR is a stand rod holder that attaches to the base of the I-Mag industrial magnetic stirrer. Paired with an H 16 V support rod and an RH 3 strap clamp, it lets you fasten vessels firmly to the stirrer and lock them against rotation. This setup is particularly useful when working with
PTFE magnetic stirring bar with a centric PEEK slide ring that reduces friction and improves concentricity on uneven vessel bottoms. All materials are FDA compliant. Round bar measuring 140 mm long by 35 mm diameter, driven by a strong SmCo magnet, with a working temperature up to 280 deg C.
Magnetic stirring bar made of PTFE, with a centric PEEK ring that reduces friction and improves concentricity on uneven vessel bottoms. Length 90 mm, diameter 22 mm, diameter with ring 28 mm. All materials are FDA compliant. Supplied as a single piece. Country of Origin: Germany Warranty: Comes
Temperature sensor for ETS-D5 / D6, coated with SafeCoat, 3 mm, 260 mm length Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here Specifications: Probe type Immersion probe Sensor type PT1000 (DIN IEC 751 Class A) Accuracy of temperature measurement
For use with ETS-D5 and ETS-D6, for work with aggressive media such as acid and alkaline solutions. -Depth of immersion 230 mm -Diameter 7 mm -Length 260 mm -Material borosilicate glass 3.3 Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here
Spare sensor for use with ETS-D5 and ETS-D6 Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here Specifications: Probe type Immersion probe Sensor type PT1000 (DIN IEC 751 Class A) Accuracy of temperature measurement (0.15 + 0.2% o.Mv.) K Response time
Electronic contact thermometer with three patented IKA operating modes. with optimised PID control RESET function with integrated pH measuring instrument incl. sensor H 62 Large, graphic LCD display with multilingual user guide Without pH electrode Compatible with all IKA - hotplates Ensures
The IKA Twister Set 4 (marketed by IKA as the MIXSTER Set 4 following a brand rename; the Ident No. 0020027390 is unchanged) is a compact, multi-position magnetic stirrer supplied with four universal magnetic drive units. Each drive stirs up to 5 liters at speeds to 3000 rpm and viscosities up to
The IKA Twister Set 3 (marketed by IKA as the MIXSTER Set 3 following a brand rename; the Ident No. 0020027389 is unchanged) is a compact, multi-position magnetic stirrer supplied with three universal magnetic drive units. Each drive stirs up to 5 liters at speeds to 3000 rpm and viscosities up to
The IKA Twister Set 2 (current IKA range: MIXSTER Set 2) is a multi-position magnetic stirrer built from two magnetic drive units. Each position mixes volumes up to 5 liters at speeds up to 3000 rpm and viscosities up to 500 mPas, and the high IP 66 protection class allows operation under harsh
The IKA Twister Set 1 (current IKA range: MIXSTER Set 1) is a compact, single-position magnetic stirrer with a powerful magnetic drive, capable of mixing volumes up to 5 liters at speeds up to 3000 rpm and viscosities up to 500 mPas. Its high IP 66 protection class allows operation under harsh
Electronic contact thermometer with three patented IKA - operating modes. with optimised PID control RESET function incl. stainless steel sensor H 62 Compatible with all IKA - hotplates Ensures perfect temperature control in liquid mediums, without overshooting the set temperature, even in the case
The IKA RO 15 Multi-Position Magnetic Stirrer is a 15-position digital stirrer without heating, engineered for synchronized stirring of multiple samples at the same time. Its advanced magnetic coil technology delivers quiet, uniform stirring performance across all positions while maintaining a
The IKA RO 10 Multi-Position Magnetic Stirrer is a 10-position digital stirrer without heating, designed for simultaneous and synchronized mixing of multiple samples. Its advanced magnetic coil technology delivers quiet, reliable, and uniform stirring across all positions, maintaining consistent
The IKA RO 5 Multi-Position Magnetic Stirrer is a 5-position digital stirrer without heating, designed for simultaneous and synchronized stirring of multiple samples. Advanced magnetic coil technology ensures quiet, uniform stirring performance across all positions, while maintaining a constant
Powerful magnetic stirrer without heating function. Features: Stirring quantity up to 150 liters (H2O) Flat, sturdy stainless steel casing Non-locking motor, infinitely variable speed Digital LED speed display Timer (0-56 min) or continuous operation Integrated USB and RS 232 interface Package
Powerful magnetic stirrer without heating function. Features: Stirring quantity up to 50 liters (H2O) Flat, sturdy stainless steel casing Non-locking motor, infinitely variable speed Digital LED speed display Timer (0-56 min) or continuous operation Integrated USB and RS 232 interface Package
The IKA i-MAG Industry stirrer is a powerful yet compact magnetic stirrer built for both laboratory and production environments. Combined with the optional I-MAG SP set-up frames for large vessels, it can efficiently mix up to 300 liters of water, while its wired controller makes handling and
The IKA C-MAG HP 10 is a high-capacity ceramic-glass hotplate for demanding laboratory heating tasks. Its chemically resistant ceramic-glass surface resists aggressive media and cleans easily, while a fixed safety circuit protects against overheating during long operations. A strong 1500 W heater
The IKA C-MAG HP 7 is a powerful ceramic-glass hotplate for precise laboratory heating. Its chemically resistant ceramic-glass surface stands up to aggressive media and cleans easily, while a fixed safety circuit guards against overheating during extended runs. A 1000 W heater and 180 x 180 mm
The IKA C-MAG HP 4 is a compact ceramic-glass hotplate built for precise, repeatable heating in the laboratory. The chemically resistant ceramic-glass surface withstands aggressive media and wipes clean easily, while a fixed safety circuit protects against overheating. Temperature is set exactly
The IKA C-MAG MS 10 is a high-capacity magnetic stirrer for laboratory mixing without heating. The chemically resistant ceramic set-up plate gives a tough, easy-to-clean working surface, while the powerful drive stirs volumes up to 15 liters of water. With a generous 260 x 260 mm plate and support
The IKA C-MAG MS 7 is a robust magnetic stirrer designed for laboratory mixing without heating. Its ceramic set-up plate provides excellent chemical resistance and a durable, easy-to-clean surface, while the strong drive comfortably stirs volumes up to 10 liters of water. A larger 180 x 180 mm
The IKA C-MAG MS 4 is a compact magnetic stirrer built for everyday laboratory mixing without any heating function. Its ceramic set-up plate delivers outstanding chemical resistance and easy cleaning, while the powerful drive handles stirring volumes up to 5 liters of water. An elevated control
The IKA big squid white is a compact magnetic stirrer built around a durable glass work surface, giving it excellent chemical resistance and easy cleaning. An electronically controlled motor delivers extra capacity across a wide speed range, while the LED display lets you read the set speed at a
The IKA color squid white is a small-footprint magnetic stirrer with a hard-wearing glass work surface that resists chemicals and wipes clean easily. Its electronically controlled motor provides more capacity across a broad speed range, and the LED display shows the set speed clearly for
IKA myPlate combines the excellent technical features of the popular and proven IKA magnetic stirrers color squid and big squid with the option of creative individualization. Design the set-up plate by yourself. You receive the device with a decorative image template that can be exchanged easily
The award-winning KMO 3 basic is a small but powerful magnetic stirrer without heating function. Key features: Unique design with glass surface Brilliant, clear white display Illuminated, flat stirring plate Key-lock button and reverse rotation Integrated USB interface (control via labworldsoft and
Small magnetic stirrer without heating. Features: For stirring quantities up to 1,000 ml (H2O) Infinitely variable speed from 0-2,500 rpm White set-up plate suitable for observing color reactions Country of Origin: Germany Warranty: Comes with 2+1 Year Manufacturer's Warranty. See details here
The ultra-flat compact magnetic stirrer features advanced magnet coil technology for reliable and efficient mixing. Its wear-free drive system operates without moving parts, ensuring long service life and maintenance-free performance. For enhanced mixing efficiency, the stirrer automatically
The IKA topolino mobil is a mobile magnetic mini-stirrer for reliably mixing quantities of up to 250 ml, engineered for both battery and mains operation so it can be used virtually anywhere in the lab or the field. Its durable brushless motor, continuously adjustable speed and high magnetic
The IKA topolino is an extremely convenient magnetic mini-stirrer designed for reliably mixing quantities of up to 250 ml. Its remarkably small footprint makes it an ideal choice wherever bench space is at a premium. Powered by a durable, brushless motor with infinitely variable speed and high
15-position digital magnetic hotplate stirrer, designed for synchronous heating and stirring. The magnetic coil technology provides noiseless and consistent stirring on all positions. The surface temperature is infinitely adjustable up to 120 deg C, producing a maximum medium temperature of 70 deg
10-position digital magnetic hotplate stirrer, designed for synchronous heating and stirring. The magnetic coil technology provides noiseless and consistent stirring on all positions. The surface temperature is infinitely adjustable up to 120 deg C, producing a maximum medium temperature of 70 deg
5-position digital magnetic hotplate stirrer, designed for synchronous heating and stirring. The magnetic coil technology provides noiseless and consistent stirring on all positions. The surface temperature is infinitely adjustable up to 120 deg C, producing a maximum medium temperature of 70 deg C
The IKA C-MAG HS 10 digital is the largest digital model in the C-MAG family, combining a chemically resistant ceramic plate with a 260 x 260 mm work surface for stirring volumes of up to 15 liters (H2O). A dual LCD shows the target and actual temperatures at the same time for clear, repeatable
The IKA C-MAG HS 7 digital is a heating magnetic stirrer with a chemically resistant ceramic plate and a generous 180 x 180 mm work surface, capable of stirring volumes of up to 10 liters (H2O). A dual LCD displays the target and actual temperatures simultaneously for clear, repeatable control. The
The IKA C-MAG HS 7 Package pairs the proven C-MAG HS 7 heating magnetic stirrer with a complete temperature-control and support set, ready to run straight out of the box. The stirrer's chemically resistant ceramic plate (180 x 180 mm) handles volumes of up to 10 liters (H2O) with a 1000 W heat
The IKA C-MAG HS 7 is a heating magnetic stirrer with a chemically resistant ceramic plate and a larger 180 x 180 mm work surface, ideal for stirring volumes of up to 10 liters (H2O). Its 1000 W heat output and 5 K/min heating rate make it well suited to higher-throughput laboratory work.
The IKA C-MAG HS 4 digital is a heating magnetic stirrer with a chemically resistant ceramic plate, designed for precise, repeatable temperature control in the laboratory. A dual LCD shows the target and actual temperatures at the same time, and the included PT 1000 sensor regulates the temperature
The IKA C-MAG HS 4 is a heating magnetic stirrer built around a chemically resistant ceramic heating plate, making it well suited for demanding laboratory work where spills and aggressive media are common. Its powerful drive handles stirring volumes of up to 5 liters (H2O), while the elevated
The IKA RET control-visc is a patented world first: a safety magnetic stirrer with heating and an integrated balance. A clear, multilingual TFT display makes it easy to set and monitor every parameter, while the stainless steel composite hot plate reaches 340 deg C for rapid, reliable heating.
The IKA RET basic is a safety magnetic stirrer with heating built for demanding laboratory work, combining a wide 50-1700 rpm speed range with integrated temperature control up to 340 deg C. Its enclosed IP 42 assembly, improved heat control technology and fast heating times make it suitable for
The IKA Plate (RCT digital) has a round top made of aluminum alloy. It stirs volumes of up to 20 liters (H2O), runs at speeds from 50-1500 rpm, and heats up to 310 deg C. It features LCD speed and temperature displays and a bushing according to DIN 12878 for external temperature sensors. Alnico
The IKA PLATE (RCT digital) is a magnetic hotplate stirrer with a round aluminum-alloy top plate that stirs volumes up to 20 L (H2O) at speeds from 50 to 1500 rpm and heats up to 310 deg C. Its hardened glass surface offers excellent visibility, chemical resistance and safety, while Alnico magnet
The IKA RCT 5 digital is a powerful magnetic stirrer with an 850 W heater, making it an ideal device for demanding stirring tasks up to 20 l. A multifunctional menu lets you set direction of rotation, timer functions and sequence programs, so the stirring process can be programmed from beginning to
The IKA RH digital white is an innovatively designed digital magnetic stirrer with heating. Its white ceramic heating plate paired with a high 600 watt heat output delivers rapid heating and excellent chemical resistance, while a bushing to DIN 12878 lets you connect an electronic contact
The IKA RH digital is an innovatively designed digital magnetic stirrer with heating, giving you precise, repeatable control for demanding laboratory work. A DIN 12878 bushing lets you connect an electronic contact thermometer such as the ETS-D5 for highly accurate temperature control with the
The IKA RH basic white is a newly designed, economical magnetic stirrer with heating. Its white ceramic heating plate combined with a high 600 watt heat output delivers rapid heating and excellent chemical resistance, while a bushing to DIN 12878 lets you connect an electronic contact thermometer
The IKA RH basic is a newly designed, economical magnetic stirrer with heating, built for reliable everyday laboratory work. A DIN 12878 bushing lets you connect an electronic contact thermometer such as the ETS-D5 for highly accurate temperature control with the sensor placed directly in the